SI-LINK™ DFDB-5445 BK Moisture-Curable Compound
A RoHS (Reduction of Hazardous Substances)-compliant flame retardant masterbatch designed to be used in conjunction with SI-LINK™ DFDA-5451 NT Polyethylene and the catalyst masterbatch SI-LINK™ DFDB-5480 NT Polyethylene to form a flame retardant SI-LINK polyethylene insulation system. This system is bulletinized by UL as DFDB-5445 BK and is moisture curable. The specific gravity of the system is 1.02. It is recommended for use in low voltage power cable and industrial cable applications. It is formulated to pass the UL-44 horizontal burn test on larger cables. SI-LINK™ DFDB-5445 BK, a highly filled black flame retardant master-batch, is intended to be used at a 35% concentration along with 60% SI-LINK Polyethylene DFDA-5451 NT and 5% SI-LINK DFDB-5480 NT Catalyst Master-batch on size #2 AWG conductors and larger. At this concentration the requirements for XHH, XHHW, XHHW-2, RHH, RHW, RHW-2, SIS, USE and USE-2 cables as defined by UL-44, UL-854 are satisfied. . SI-LINK™ DFDB-5445 BK offers flexibility in tailoring the formulation to meet the horizontal burn requirement on a range of cable sizes. At increased concentrations, SI-LINK™ DFDB-5445 BK has been shown to provide horizontal burn test compliance in smaller sizes. The economics of the formulation may be optimized for a particular application depending on the cable sizes produced and the UL submittal sizes selected. Such factors as processing conditions, degree of cure and type of conductor can affect the results, so cable manufacturers must determine the optimal formulations for their applications. Recommendations are available upon request. SPECIFICATIONS The SI-LINK™ DFDB-5445 BK system is bulletinized by UL for XHH, XHHW, XHHW-2, RHH, RHW, RHW-2, SIS, USE and USE-2 on sizes 2 AWG and larger. It is suitable for CSA RW-90, and RWU-90 applications.
- Elongation 是 否 300 %
- LOI-Limiting Oxygen Index 是 否 26 %
- Tensile Strength in MPa (psi) 是 否 13.8 (2000), 13.8 (2000) Not at Yield
此材料没有安全数据说明书 如需了解更多信息，请 联系陶氏。