MOR-FREE™ ELM 415A Solventless Adhesives

Part of a a solventless two-component polyurethane adhesive system being processed at 45-50°. The combination is suitable for the lamination of printed and non-printed films such as cellophane, PE, PP, PVdC and acrylic coated films, BOPP, PA, PETP, APET as well as metalized films and aluminium foils. The combination was especially developed for the production of laminates where after a very short time, aromatic amines should not be detectable in the migrate anymore. MOR-FREE™ ELM 415A Adhesive / CR 88-554 Coreactant is a solventless two-component polyurethane adhesive system being processed at 50-60°. The combination is suitable for the lamination of printed and non-printed films such as cellophane, PE, PP, PVdC and acrylic coated films, BOPP, PA, PETP, APET with superior bond to metalized films and aluminium foils. The combination is a high viscosity adhesive, especially developed for the production of laminates where after a very short time, aromatic amines should not be detectable in the migrate anymore. MOR-FREE™ ELM 415A Adhesive / MOR-FREE™ C-83 Coreactant is a solventless two component polyurethane adhesive system being processed at 40-50°C. The combination is an adhesive with acceptable green tack, specially developed for the production of laminates where after a very short time already aromatic amines should not be detectable in the migrate. The combination is suitable for the lamination of printed and non-printed films such as cellophane, PE, PP, PVdC and acrylic coated films, BOPP, PA, PETP, APET as well as metalized films and aluminum foils. MOR-FREE™ ELM 415A Adhesive / C 140 Coreactant is a solventless two component polyurethane adhesive system being processed at 40-50°C. The combination is a low viscosity adhesive, specially developed for the production of laminates where after a very short time already aromatic amine should not be detectable in the migrate. The combination is suitable for the lamination of printed and non-printed films such as cellophane, PE, PP, PVdC and acrylic coated films, BOPP, PA, PETP, APET as well as metalized films and aluminum foils. MOR-FREE™ ELM 415A Adhesive / MOR-FREE™ C 79 Coreactant is a solventless two component polyurethane adhesive system being processed at 40-50°C. The combination is a low viscosity adhesive, specially developed for the production of laminates where after a very short time already aromatic amine should not be detectable in the migrate. The combination is suitable for the lamination of printed and non-printed films such as cellophane, PE, PP, PVdC and acrylic coated films, BOPP, PA, PETP, APET as well as metalized films and aluminum foils.