[{"values":[{"value":"Português do Brasil-巴西葡萄牙语","languageCode":"pt-br","link":"javascript:void(0);"},{"value":"日本語-日本","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英语","languageCode":"en-us","link":"javascript:void(0);"}],"label":"BR","default":"pt-br"},{"values":[{"value":"Português do Brasil-巴西葡萄牙语","languageCode":"pt-br","link":"javascript:void(0);"},{"value":"日本語-日本","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英语","languageCode":"en-us","link":"javascript:void(0);"}],"label":"JP","default":"ja-jp"},{"values":[{"value":"Português do Brasil-巴西葡萄牙语","languageCode":"pt-br","link":"javascript:void(0);"},{"value":"日本語-日本","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英语","languageCode":"en-us","link":"javascript:void(0);"}],"label":"CN","default":"zh-cn"},{"values":[{"value":"Português do Brasil-巴西葡萄牙语","languageCode":"pt-br","link":"javascript:void(0);"},{"value":"日本語-日本","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英语","languageCode":"en-us","link":"javascript:void(0);"}],"label":"US","default":"en-us"}]

DOWSIL™ X3-6211 Encapsulant

One-part, clear, UV cure.



  • Adhesion to 金属, 铝材, 塑料, FR4, 陶瓷
  • Color 透明
  • Cure Type 加成固化
  • Dielectric Strength 425 volts per mil v/mil
  • Dynamic Viscosity 925 Centipoise
  • Flowable true
  • Gel Hardness 105 Grams/Penetration (1
  • Hydrophobic true
  • Linear CTE 430 um/m/Deg C
  • Low Odor true
  • Number of Parts 单组份
  • Optically Clear true
  • Polyesters true
  • Primerless Adhesion 无需底涂
  • Resistance Type 抗氧化, 耐臭氧, 热阻, 抗紫外线, 防水
  • Self Leveling true
  • Shelf Life 365 Days
  • Soft Gel true
  • Soft Stress Relieving true
  • Solventless true
  • Specific Gravity @ 25C 0.99
  • Temperature Range -80 to 150 °C
  • Temperature Stable 强/高, 弱/低
  • Thermosetting true
  • Unworked Penetration 45 mm/10
  • UV Cure true
  • Water Resistant true
  • DOWSIL™ 3-1944 RTV Coating
    One-part, translucent, moisture RTV, moderate flow, fast tack-free, contains UV indicator, UL 746 and Mil Spec tested.

  • DOWSIL™ 3140 RTV Coating
    One-part, translucent adhesive or coating with good flowability, high elongation value for vibration/ mechanical shock dampening and low stress, good flame resistance, UL, IPC and Mil Spec tested, contains UV indicator.

  • DOWSIL™ 1200 OS Primer
    An air drying primer supplied as a dilute solution of moisture reactive materials in volatile siloxane and is used to improve both the quality and speed of adhesion development to room temperature vulcanizing silicone sealants to a variety of common non-porous substrates.

  • SYLGARD™ 184 Silicone Elastomer Kit

    Two-part, clear, 10:1, RT and heat cure, good strength, UL and Mil Spec, same as SYLGARD™ 182 but with faster RT cure.

  • DOWSIL™ 3165 Fast Tack RTV Adhesive Sealant
    One-part, gray, moisture RTV, fast cure, UL.

  • DOWSIL™ 1-2577 Low VOC Conformal Coating
    One-part, clear, RTV cure with mild heat acceleration possible, hard slick finish with abrasion resistance, solvent-borne (VOC exempt in many areas), UL and Mil Spec, contains UV indicator.

  • SYLGARD™ 527 A&B Silicone Dielectric Gel

    A two-part, 1 to 1 mix ratio dielectric gel that is suitable for sealing and protecting various electronic devices, especially those with delicate components.

  • DOWSIL™ TC-3015 Re-workable Thermal Gel

    A one part, heat cure silicone based thermally conductive gel with good re-workability. It’s supplied as non-flowable paste and can be pressed lower to 100 um thickness in thermal management application. It can be cured to elastic pad with certain tensile strength and elongation which can make sure the material can be peeled off easily and completely without residue in rework process.

  • SILASTIC™ MS-1002 Moldable Silicone A&B Kit
    A medium viscosity, high Shore A hardness, two-part, 1 to 1 ratio, fast curing optical molding resin for producing fine detail with good resistance to environmental aging.

  • DOWSIL™ EE-3200 Low Stress Silicone Encapsulant
    Has a very low hardness and viscosity to minimize internal stress generation, fill small gaps, and improve manufacturing speed for complex and high volume electronic devices.

如需了解更多信息,请 联系陶氏


DOWSIL™ X3-6211 Encapsulant
如需了解更多信息,请 联系陶氏

DOWSIL™ X3-6211 Encapsulant


DOWSIL™ X3-6211 Encapsulant
如需了解该产品的经销商选项,请 联系陶氏