DOWSIL™ TC-2035 Adhesive A/B Kit
- Color - Part A 是 否 白色
- Color - Part B 是 否 红棕色
- Cure Type 是 否 加成固化
- Density (g/cm3) 是 否 3 g/cm3
- Dielectric Constant at 100 Hz 是 否 6
- Dielectric Constant at 100 kHz 是 否 5.9
- Dielectric Strength (kV/mm) 是 否 21 kV/mm
- Elongation JIS#3 是 否 43 %
- Heat Cure 是 否 10 Minutes @ 150 Deg C, 30 Minutes @ 125 Deg C
- JIS Type-A 是 否 95
- Linear CTE 是 否 18 um/m/Deg C
- Pot Life 是 否 >= 240 Minutes
- Primerless Adhesion 是 否 无需底涂
- Resistance Type 是 否 热阻
- Tensile Strength JIS#3 是 否 3.6 MPa
- Viscosity 是 否 125000 mPa.s
- Viscosity (Part A) 是 否 130000 mPa.s
- Viscosity (Part B) 是 否 118000 mPa.s
- Volume Resistivity 是 否 5.5e+015 ohm-centimeters
DOWSIL™ 756 SMS Building Sealant
A medium-modulus elastomeric sealant designed for weatherproofing sensitive porous stone and metal panel substrates to reduce residue rundown and substrate staining in new and remedial construction.
DOWSIL™ 1200 OS Primer
An air drying primer supplied as a dilute solution of moisture reactive materials in volatile siloxane and is used to improve both the quality and speed of adhesion development to room temperature vulcanizing silicone sealants to a variety of common non-porous substrates.
DOWSIL™ 983 Structural Glazing Sealant Base and Curing Agent
Designed for specialized use where dual structural and weatherseal applications are desired for factory glazing and curtainwall production. Once cured, this structural sealant forms a durable, flexible, watertight bond that can be warranted for 20 years and used in ±25% movement weatherseal applications. It has excellent unprimed adhesion to glass, alodine, and anodized aluminum1, although DOWSIL™ Primer-C OS is recommended for fast and consistent adhesion, especially to high-performance substrates approved for architectural structural glazing applications.
DOWSIL™ 791 Weatherproofing Sealant
A one-part, medium-modulus, elastomeric sealant designed for general weathersealing. It is a silicone formulation that cures to a flexible and curable silicone rubber building joint seal.
- DOWSIL™ Primer-C OS
DOWSIL™ 995 Silicone Structural Sealant
A one-component, self-priming, shelf-stable, neutral-cure, elastomeric adhesive specifically formulated for silicone structural glazing and exhibits excellent unprimed adhesion to most building substrates. This product has superior unprimed adhesion for structural glazing applications for hurricane or impact rated windows and doors. It has a movement capability of +/- 50%.
DOWSIL™ 7091 Adhesive Sealant
High performance, neutral cure silicone adhesive/sealant.
DOWSIL™ 795 Silicone Building Sealant
A one-part, cold-applied, non-sagging silicone material that cures to a medium modulus silicone rubber upon exposure to atmospheric moisture.
DOWSIL™ 790 Silicone Building Sealant
A one-part silicone formulation that cures in the presence of atmospheric moisture to produce a durable, fire-resistant, flexible and ultra-low-modulus silicone rubber building joint seal.
DOWSIL™ Q1-9226 Thermally Conductive Adhesive
Typical applications include bonding organic and ceramic substrates to heat sinks for electronic control modules in automotive applications. It is a two-part, gray, 1:1 mix ratio, heat cure, moderate flow, self-priming, thermally conductive adhesive.
此材料没有安全数据说明书 如需了解更多信息，请 联系陶氏。