1-part, fast tack free, flowable silicone adhesive with controlled volatility and good flame resistance.



  • Adhesion to 金属, 塑料, 陶瓷
  • Color 白色
  • Cure Type 缩合固化
  • Dielectric Constant at 100 Hz 3.2
  • Dielectric Constant at 100 kHz 2.7
  • Dielectric Strength (kV/mm) 20 kV/mm
  • Dissipation Factor at 100 Hz 0.08
  • Dissipation Factor at 100 kHz 0.1
  • Durometer - Shore D 63 Shore D
  • Elongation 50 %
  • Hydrophobic true
  • Low Odor true
  • Low Volatility true
  • Non-Slump true
  • Nonflowable true
  • Number of Parts 单组份
  • Primerless Adhesion 无需底涂
  • Resistance Type 抗氧化, 耐臭氧, 耐溶剂性, 热阻, 抗紫外线, 防水
  • Shear 260 psi
  • Shelf Life 270 Days
  • Solventless true
  • Specific Gravity @ 25C 1.71
  • Temperature Range -45 to 150 °C
  • Temperature Stable 强/高, 弱/低
  • Tensile Strength 375 psi
  • Thixotropic true
  • Volume Resistivity 8.33 ohm-centimeters
  • Water Resistant true
  • DOWSIL™ 1-2577 Conformal Coating

    One-part, transparent medium viscosity conformal coating with firm, abrasion resistant surface after cure.

  • DOWSIL™ 7091 Adhesive Sealant
    High performance, neutral cure silicone adhesive/sealant.

  • SYLGARD™ 184 Silicone Elastomer Kit

    Two-part, clear, 10:1, RT and heat cure, good strength, UL and Mil Spec, same as SYLGARD™ 182 but with faster RT cure.

  • DOWSIL™ 1200 OS Primer
    An air drying primer supplied as a dilute solution of moisture reactive materials in volatile siloxane and is used to improve both the quality and speed of adhesion development to room temperature vulcanizing silicone sealants to a variety of common non-porous substrates.

  • DOWSIL™ 7094 Flowable Sealant
    A black, low modulus silicone adhesive/sealant designed for applications where a flowable product and non corrosive cure with durable adhesion to a variety of substrates is required.

  • DOWSIL™ 3145 RTV Mil-A-46146 Adhesive / Sealant

    One-part, moisture RTV, non-flow, high strength, UL and Mil Spec.

  • DOWSIL™ TC-4525 A/B

    A thermally Conductive Gap Filler offers thermal conductivity of 2.5W/m.K. This is a soft and compressible silicone material designed to dissipate heat from electronic modules by conducting it to a heat sink such as an aluminum housing. Excellent fit for automotive electronics and battery packs applications.

  • DOWSIL™ 3140 RTV Coating
    One-part, translucent adhesive or coating with good flowability, high elongation value for vibration/ mechanical shock dampening and low stress, good flame resistance, UL, IPC and Mil Spec tested, contains UV indicator.

  • DOWSIL™ 340 Heat Sink Compound
    White, non-flowing, highly filled compound, good thermal conductivity.

  • DOWSIL™ SE 9186 Sealant
    One-part, moisture cure RTV, flowable, fast tack-free, controlled volatility.

如需了解更多信息,请 联系陶氏


如需了解更多信息,请 联系陶氏




如需了解该产品的经销商选项,请 联系陶氏