DOWSIL™ EA-6060 Adhesive A&B
A two-part, non-flowing silicone adhesive enabling assembly production savings due to a fast cure at moderate temperature.
- Two-Part, Low Temperature Cure:Enables assembly production savings due to a fast cure at a moderate temperature (80°C).
- Better Transmission: Retains original physical and electrical properties over a broad range of operating conditions, with a scavenger to reduce voids.
- Longer Open Time: More efficient processability; greater manufacturing flexibility and reduced waste.
- UV Dyed: Enables easier inspections.
- Elongation 是 否 290 %
- Specific Gravity 是 否 1.3/1.2
- Tensile Strength 是 否 449.617 psi
- Viscosity - Part A 是 否 190 Pa.s
- Viscosity - Part B 是 否 90 Pa.s
- Working Time in hrs at 25 Deg C 是 否 1
DOWSIL™ 795 Silicone Building Sealant
A one-part, cold-applied, non-sagging silicone material that cures to a medium modulus silicone rubber upon exposure to atmospheric moisture.
DOWSIL™ 7091 Adhesive Sealant
High performance, neutral cure silicone adhesive/sealant.
SYL-OFF™ 4000 Catalyst
General purpose catalyst which is compatible with all Syl-off® brand solvent based and solventless release coating systems as well as Plantinum cure silicone PSAs.
DOWSIL™ 995 Silicone Structural Sealant
A one-component, self-priming, shelf-stable, neutral-cure, elastomeric adhesive specifically formulated for silicone structural glazing and exhibits excellent unprimed adhesion to most building substrates. This product has superior unprimed adhesion for structural glazing applications for hurricane or impact rated windows and doors. It has a movement capability of +/- 50%.
DOWSIL™ 790 Silicone Building Sealant
A one-part silicone formulation that cures in the presence of atmospheric moisture to produce a durable, fire-resistant, flexible and ultra-low-modulus silicone rubber building joint seal.
DOWSIL™ 983 Structural Glazing Sealant Base and Curing Agent
Designed for specialized use where dual structural and weatherseal applications are desired for factory glazing and curtainwall production. Once cured, this structural sealant forms a durable, flexible, watertight bond that can be warranted for 20 years and used in ±25% movement weatherseal applications. It has excellent unprimed adhesion to glass, alodine, and anodized aluminum1, although DOWSIL™ Primer-C OS is recommended for fast and consistent adhesion, especially to high-performance substrates approved for architectural structural glazing applications.
DOWSIL™ 756 SMS Building Sealant
A medium-modulus elastomeric sealant designed for weatherproofing sensitive porous stone and metal panel substrates to reduce residue rundown and substrate staining in new and remedial construction.
DOWSIL™ Q1-9226 Thermally Conductive Adhesive
Typical applications include bonding organic and ceramic substrates to heat sinks for electronic control modules in automotive applications. It is a two-part, gray, 1:1 mix ratio, heat cure, moderate flow, self-priming, thermally conductive adhesive.
XIAMETER™ PMX-200 Silicone Fluid 350 cSt
100% active, 350 cSt, polydimethylsiloxane polymer. INCI Name: Dimethicone
DOWSIL™ 791 Weatherproofing Sealant
A one-part, medium-modulus, elastomeric sealant designed for general weathersealing. It is a silicone formulation that cures to a flexible and curable silicone rubber building joint seal.
此材料没有安全数据说明书 如需了解更多信息，请 联系陶氏。