DOWSIL™ 1-4173 Thermally Conductive Adhesive
One-part gray, flowable thermally conductive adhesive with high tensile strength.
- Adhesion to 是 否 金属, 塑料, 陶瓷
- Color 是 否 灰色
- Cure Type 是 否 加成固化
- Durometer - Shore A 是 否 92 Shore A
- Flowable 是 否 true
- Heat Cure 是 否 90 Minutes @ 100 Deg C, 30 Minutes @ 125 Deg C, 20 Minutes @ 150 Deg C
- Linear CTE 是 否 125 um/m/Deg C
- Number of Parts 是 否 单组份
- Primerless Adhesion 是 否 无需底涂
- Resistance Type 是 否 耐臭氧, 热阻, 抗紫外线
- Self Leveling 是 否 true
- Shear 是 否 650 psi
- Solventless 是 否 true
- Temperature Stable 是 否 强/高, 弱/低
- Thermal Conductivity 是 否 1.8 Watts per meter K
- Thermosetting 是 否 true
- Viscosity 是 否 61000 mPa.s
- Water Resistant 是 否 true
XIAMETER™ PMX-200 Silicone Fluid 350 cSt
100% active, 350 cSt, polydimethylsiloxane polymer. INCI Name: Dimethicone
DOWSIL™ 791 Weatherproofing Sealant
A one-part, medium-modulus, elastomeric sealant designed for general weathersealing. It is a silicone formulation that cures to a flexible and curable silicone rubber building joint seal.
DOWSIL™ 3-6265 Thixotropic Adhesive
One-part, black, heat cure, high strength, self-priming, contains UV indicator, non-flowing version of 3-6611. Suitable for use in automotive and industrial assembly areas including sealing lids and housings, attaching base plates gasket, and connector sealing.
DOWSIL™ 7091 Adhesive Sealant
High performance, neutral cure silicone adhesive/sealant.
DOWSIL™ 3-1953 Conformal Coating
One-part, translucent, fast moisture RTV cure with mild heat acceleration possible, soft, stress-relieving, contains UV indicator.
DOWSIL™ 1200 OS Primer
An air drying primer supplied as a dilute solution of moisture reactive materials in volatile siloxane and is used to improve both the quality and speed of adhesion development to room temperature vulcanizing silicone sealants to a variety of common non-porous substrates.
XIAMETER™ PMX-1503 Fluid
A blend of an ultra high viscosity dimethiconol in a low viscosity dimethicone fluid for use in skincare, suncare, and color cosmetic applications. INCI Name: Dimethicone (and) Dimethiconol.
DOWSIL™ Q1-9226 Thermally Conductive Adhesive
Typical applications include bonding organic and ceramic substrates to heat sinks for electronic control modules in automotive applications. It is a two-part, gray, 1:1 mix ratio, heat cure, moderate flow, self-priming, thermally conductive adhesive.
SYL-OFF™ 4000 Catalyst
General purpose catalyst which is compatible with all Syl-off® brand solvent based and solventless release coating systems as well as Plantinum cure silicone PSAs.
DOWSIL™ 1-4174 Thermally Conductive Adhesive
One-part, grey, heat cure, thermally conductive, low flow, same as 1-4173 with 7 mil (178 micron) spacer beads, self-priming.
此材料没有安全数据说明书 如需了解更多信息，请 联系陶氏。