DOWSIL™ TC-4025 Dispensable Thermal Pad Kit

Two-part, 1 to 1 mix ratio, thermally conductive dispensable pad.



  • Color 蓝色
  • Color - Part A 白色
  • Dielectric Constant at 100 Hz 3.31
  • Dielectric Constant at 100 kHz 2.94
  • Dielectric Constant at 1MHz 6.4
  • Dissipation Factor at 100 Hz 0.34
  • Dissipation Factor at 100 kHz 0.004
  • Durometer - Shore 00 61 Shore 00
  • Elongation 66 %
  • Heat Cure 30 Minutes @ 125 Deg C
  • Nonvolatile Content 99.7 %
  • Number of Parts 双组份
  • Shelf Life 273.75 Days
  • Specific Gravity 2.81 gm-cm3
  • Tensile Strength 49.31 psi
  • Thermal Conductivity 2.51 Watts per meter K
  • Viscosity (Part A) 126000 mPa.s
  • Viscosity (Part B) 127000 mPa.s
  • Volume Resistivity 8.84E13 ohm-centimeters
  • DOWSIL™ 3145 RTV Mil-A-46146 Adhesive / Sealant

    One-part, moisture RTV, non-flow, high strength, UL and Mil Spec.

  • DOWSIL™ SE 9187 L Adhesive

    One-part, black, clear or white, fast tack-free, controlled volatility adhesive with very low viscosity suitable for display module assembly, PCB protection (conformal coating) and general potting.

  • DOWSIL™ 3-1953 Conformal Coating
    One-part, translucent, fast moisture RTV cure with mild heat acceleration possible, soft, stress-relieving, contains UV indicator.

  • DOWSIL™ TC-4525 A/B

    A thermally Conductive Gap Filler offers thermal conductivity of 2.5W/m.K. This is a soft and compressible silicone material designed to dissipate heat from electronic modules by conducting it to a heat sink such as an aluminum housing. Excellent fit for automotive electronics and battery packs applications.

  • DOWSIL™ 3140 RTV Coating
    One-part, translucent adhesive or coating with good flowability, high elongation value for vibration/ mechanical shock dampening and low stress, good flame resistance, UL, IPC and Mil Spec tested, contains UV indicator.

  • SYLGARD™ 527 A&B Silicone Dielectric Gel

    A two-part, 1 to 1 mix ratio dielectric gel that is suitable for sealing and protecting various electronic devices, especially those with delicate components.

  • DOWSIL™ 744 RTV Adhesive Sealant
    One-part, white, moisture RTV, moderate flow, fast tack-free.

  • DOWSIL™ 7091 Adhesive Sealant
    High performance, neutral cure silicone adhesive/sealant.

  • DOWSIL™ 3165 Fast Tack RTV Adhesive Sealant
    One-part, gray, moisture RTV, fast cure, UL.

  • DOWSIL™ 1200 OS Primer
    An air drying primer supplied as a dilute solution of moisture reactive materials in volatile siloxane and is used to improve both the quality and speed of adhesion development to room temperature vulcanizing silicone sealants to a variety of common non-porous substrates.

如需了解更多信息,请 联系陶氏


DOWSIL™ TC-4025 Dispensable Thermal Pad Kit
如需了解更多信息,请 联系陶氏

DOWSIL™ TC-4025 Dispensable Thermal Pad Kit


DOWSIL™ TC-4025 Dispensable Thermal Pad Kit
如需了解该产品的经销商选项,请 联系陶氏