DOW™ LDPE 582E Low Density Polyethylene Resin

This product can be readily extruded using conventional blown film techniques utilising melt temperatures between 150 and 170°C. This product, when properly fabricated, shows good mechanical properties and high optical properties. It shows very good drawdown properties and excellent processability. This product contains slip and antiblock additives. Regulations: DOW LDPE 582E Polyethylene Resin should comply with: - U.S. FDA 21 CFR 177.1520(c) 2.2 - EU, No 10/2011 - U.S. FDA-DMF - Consult the regulations for complete details. Applications: - Light produce bags. - Soft goods packaging. - Textile packaging. - High clarity applications.



  • 2% Secant Modulus, MD (ASTM D882) in MPa (psi) 190 (27600)
  • 2% Secant Modulus, TD (ASTM D882) in MPa (psi) 175 (25400)
  • Dart Drop Impact (ASTM D1709A) in grams (lbs) 120 g (ISO 7765-1a-/A)
  • Density (ASTM D792) 0.923 g/cm3
  • Elmendorf Tear Strength, MD (ASTM D1922) in grams (lbs) 500 g
  • Elmendorf Tear Strength, TD (ASTM D1922) in grams (lbs) 400 g
  • Gloss (45 degree) 70 %
  • Haze (ASTM D1003) 7 %
  • Melt Index (g/10min @190°C/21.6 kg) 3.5
  • Tensile Elongation at Break, MD 450 %
  • Tensile Elongation at Break, TD 650 %
  • Tensile Strength Break, MD (ASTM D882) in MPa (psi) 17 (2470)
  • Tensile Strength Break, TD (ASTM D882) in MPa (psi) 15 (2180)
  • Tensile Strength Yield, MD (ASTM D882) in MPa (psi) 9 (1310)
  • Tensile Strength Yield, TD (ASTM D882) in MPa (psi) 9 (1310)
  • Vicat Softening Point in °C(°F) 93°C (199°F)

如需了解更多信息,请 联系陶氏


DOW™ LDPE 582E Low Density Polyethylene Resin
如需了解更多信息,请 联系陶氏

DOW™ LDPE 582E Low Density Polyethylene Resin


DOW™ LDPE 582E Low Density Polyethylene Resin
如需了解该产品的经销商选项,请 联系陶氏