[{"values":[{"value":"日本語-日本","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英语","languageCode":"en-us","link":"javascript:void(0);"}],"label":"JP","default":"ja-jp"},{"values":[{"value":"日本語-日本","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英语","languageCode":"en-us","link":"javascript:void(0);"}],"label":"CN","default":"zh-cn"},{"values":[{"value":"日本語-日本","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英语","languageCode":"en-us","link":"javascript:void(0);"}],"label":"US","default":"en-us"}]

AFFINITY™ PL 1888G Polyolefin Plastomer

This product is primarily used for high speed packaging applications requiring low seal initiation temperature and good machinability (low consistent coefficient of friction and low block force). This resin is designed to give a COF of < 0.2 for an ~1.0 mil sealant layer in a coextruded film and run fast and trouble-free on most extrusion equipment, including blown film dies equipped with narrow die gaps. - For use in monolayer films and as the sealant layer in multilayer films - For fresh-cut produce, meat, cheese, and other high speed packaging applications requiring good machinability - Fast processing on narrow die gaps

性能

这些数值为典型性能,并且不用于在规格制定过程中使用。

  • Anti-block true
  • Density 0.904 g/cm3
  • Elmendorf Tear Strength, MD (ASTM D1922) in grams (lbs) 430 g
  • Elmendorf Tear Strength, TD (ASTM D1922) in grams (lbs) 720 g
  • Haze (ASTM D1003) 3.4 %
  • Heat Seal Initiation Temp in °C(°F) 80°C (176°F)
  • Melt Index (g/10 minutes) 1
  • Melting Point, DSC (Dow Method) in °C(°F) 98°C (208°F)
  • Puncture Resistance (Dow Method) in joules/cm3 (lbs/in3) 15.6 (189 )
  • Slip true
  • Tensile Elongation at Break, MD 600 %
  • Tensile Elongation at Break, TD 570 %
  • Tensile Strength Break, MD (ASTM D882) in MPa (psi) 49.3 (7150)
  • Tensile Strength Break, TD (ASTM D882) in MPa (psi) 39.8 (5770)
  • Tensile Strength Yield, MD (ASTM D882) in MPa (psi) 5.92 (858)
  • Tensile Strength Yield, TD (ASTM D882) in MPa (psi) 5.98 (868)
  • Vicat Softening Point in °C(°F) 85 °C (185°F)

此材料没有安全数据说明书
如需了解更多信息,请 联系陶氏

没有找到此材料按所选语言显示的销售规格

AFFINITY™ PL 1888G Polyolefin Plastomer
该产品暂无技术数据表
如需了解更多信息,请 联系陶氏

AFFINITY™ PL 1888G Polyolefin Plastomer


该产品暂无法规信息说明书


AFFINITY™ PL 1888G Polyolefin Plastomer
如需了解该产品的经销商选项,请 联系陶氏