ELITE™ 5800G Enhanced Polyethylene Resin
An enhanced polyethylene resin for extrusion. Main Characteristics are high performance sealant, designed for use on typical extrusion coating hardware, robust extrusion and melt drawing performance for high capacity operations.
속성
*이 값은 일반적인 속성이며 제품 사양에는 사용되지 않습니다.
물리적 특성
- 2% Secant Modulus, MD (ASTM D882) in MPa (psi) Yes No 134 (19400)
- 2% Secant Modulus, TD (ASTM D882) in MPa (psi) Yes No 134 (19400)
- Vicat Softening Point in °C(°F) Yes No 86 (187)
- 강화 LLDPE Yes No 예
- 기능 Yes No Mechanical Performance
- 녹는 점, DSC (Dow Method) in °C(°F) Yes No 103 (217)
- 밀도 (ASTM D792) Yes No 0.911 g/cm3
- 슬립 Yes No 아니오
- 안티 블록 Yes No 아니오
- 용융 지수 (g/10min @190°C/2.16 kg) Yes No 12
- 프로세스 Yes No Extrusion Coating and Lamination
이 자재에 대해 이용할 수 있는 안전성 데이터 시트 없음 자세한 내용은 Dow에 문의 하십시오.
이 자재에 대해 이용할 수 있는 안전성 데이터 시트 없음
자세한 내용은 Dow에 문의 하십시오.
No Food Contact Letters are available online for this material 자세한 내용은 Dow에 문의 하십시오.
No Food Contact Letters are available online for this material
자세한 내용은 Dow에 문의 하십시오.
선택한 언어로 작성된 자재 판매 사양 찾지 못함
모든 제품은 동일한 배송일로 주문하여야 합니다.
모든 제품은 동일한 제품군에 있어야합니다.
모든 제품은 동일한 주문으로 구매해야합니다.
모든 제품은 동일한 플랜트에서 출하해야합니다.
수량({{ajax.content.bundlePriceData.priceTable.qtyUnitSapName}}) | 단위 가격({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
---|---|
{{price.fromQuantity}} + {{price.fromQuantity}} - {{price.toQuantity}} {{price.fromQuantity}} + | {{price.priceData.formattedValue}} |
수량({{ajax.content.bundlePriceData.priceTable.sapName}}) | 단위 가격({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
1 + | {{ajax.content.bundlePriceData.priceTable.displayFlatPrice}} |