DOW™ 722M Low Density Polyethylene Resin
사용:
- Gable top carton fitments
- Integrated tear membranes
- Food and beverage closures
혜택:
- Processability
- Toughness
- Tear properties
- Sealability
속성
*이 값은 일반적인 속성이며 제품 사양에는 사용되지 않습니다.
물리적 특성
- Impact Strength in MPa (psi) 예 No 242 kJ/m2 (115 ft lb/in2) ASTM D1822
- Tensile Strength Break, MD (ASTM D882) in MPa (psi) 예 No 10.3 (1500) (ASTM D638)
- Tensile Strength Break, TD (ASTM D882) in MPa (psi) 예 No 10.3 (1500) (ASTM D638)
- Tensile Strength Yield, MD (ASTM D882) in MPa (psi) 예 No 8.96 (1300) (ASTM D638)
- Tensile Strength Yield, TD (ASTM D882) in MPa (psi) 예 No 8.96 (1300) (ASTM D638)
- 기능 예 No Mechanical Performance
- 밀도 (ASTM D792) 예 No 0.918 g/cm3
- 슬립 예 No 아니오
- 안티 블록 예 No 아니오
- 용융 지수 (g/10min @190°C/2.16 kg) 예 No 8
- 절단 신율, MD 예 No 550 (ASTM D638) %
- 절단 신율, TD 예 No 550 (ASTM D638) %
- 폐쇄 유형 예 No Fitments, Hinges, 탭 끌어오기
- 프로세스 예 No Injection Molding
이 자재에 대해 이용할 수 있는 안전성 데이터 시트 없음 자세한 내용은 Dow에 문의 하십시오.
이 자재에 대해 이용할 수 있는 안전성 데이터 시트 없음
자세한 내용은 Dow에 문의 하십시오.
No Food Contact Letters are available online for this material 자세한 내용은 Dow에 문의 하십시오.
No Food Contact Letters are available online for this material
자세한 내용은 Dow에 문의 하십시오.
선택한 언어로 작성된 자재 판매 사양 찾지 못함
모든 제품은 동일한 배송일로 주문하여야 합니다.
모든 제품은 동일한 제품군에 있어야합니다.
모든 제품은 동일한 주문으로 구매해야합니다.
모든 제품은 동일한 플랜트에서 출하해야합니다.
수량({{ajax.content.bundlePriceData.priceTable.qtyUnitSapName}}) | 단위 가격({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
---|---|
{{price.fromQuantity}} + {{price.fromQuantity}} - {{price.toQuantity}} {{price.fromQuantity}} + | {{price.priceData.formattedValue}} |
수량({{ajax.content.bundlePriceData.priceTable.sapName}}) | 단위 가격({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
1 + | {{ajax.content.bundlePriceData.priceTable.displayFlatPrice}} |