XIAMETER™ OFX-5211 Fluid
Low molecular weight nonionic silicone polyether surfactant. Performance enhancer that provides rapid spreading and wetting of agricultural chemicals. Especially in water-soluble broadleaf herbicides, insecticides, fungicides and plant growth regulators. Highly efficient silicone glycol copolymer wetting agent for synthetic leathers.
- Color はい いいえ 透明, アンバー
- Flash Point, Closed Cup はい いいえ > 101 °C
- Kinetic / Kinematic Viscosity はい いいえ 40 Centistokes
- Shelf Life はい いいえ 720 Days
- Solids Content はい いいえ 100 %
- Wetting はい いいえ 最高
DOWSIL™ 995 Silicone Structural Sealant
A one-component, self-priming, shelf-stable, neutral-cure, elastomeric adhesive specifically formulated for silicone structural glazing and exhibits excellent unprimed adhesion to most building substrates. This product has superior unprimed adhesion for structural glazing applications for hurricane or impact rated windows and doors. It has a movement capability of +/- 50%.
XIAMETER™ PMX-200 Silicone Fluid 350 cSt
100% active, 350 cSt, polydimethylsiloxane polymer. INCI Name: Dimethicone
DOWSIL™ 791 Weatherproofing Sealant
A one-part, medium-modulus, elastomeric sealant designed for general weathersealing. It is a silicone formulation that cures to a flexible and curable silicone rubber building joint seal.
SYL-OFF™ 4000 Catalyst
General purpose catalyst which is compatible with all Syl-off™ brand solvent based and solventless release coating systems as well as Plantinum cure silicone PSAs.
DOWSIL™ 983 Structural Glazing Sealant Base and Curing Agent
Designed for specialized use where dual structural and weatherseal applications are desired for factory glazing and curtainwall production. Once cured, this structural sealant forms a durable, flexible, watertight bond that can be warranted for 20 years and used in ±25% movement weatherseal applications. It has excellent unprimed adhesion to glass, alodine, and anodized aluminum1, although DOWSIL™ Primer-C OS is recommended for fast and consistent adhesion, especially to high-performance substrates approved for architectural structural glazing applications.
DOWSIL™ 7091 Adhesive Sealant
High performance, neutral cure silicone adhesive/sealant.
DOWSIL™ 795 Silicone Building Sealant
A one-part, cold-applied, non-sagging silicone material that cures to a medium modulus silicone rubber upon exposure to atmospheric moisture.
XIAMETER™ PMX-0244 Cyclotetrasiloxane
A volatile methylsiloxane fluid, clear, odorless, VOC-exempt, low toxicity, low surface tension and evaporates completely at room temperature. INCI Name: Cyclotetrasiloxane
CARBOWAX™ Polyethylene Glycol 8000 Flake (Inhibited)
High molecular weight Polyethylene Glycol that provides enhanced solvency, lubricity, hygroscopicity and other important functional properties in a wide range of formulations. Hard, waxy solid having the appearance of thin, irregularly shaped shards. The flake thickness is slightly variable within a range of approximately 0.02 – 0.07 inches. Chemically equivalent to its spherical granular counterpart, being produced from the same molten material. Owing to the lower surface area as compared to the granular form, the flaked grade exhibits longer relative dissolution times in water-based applications. This material contains the added stabilizer, BHT, at a nominal concentration of 100 PPM.
DOWSIL™ Q1-9226 Thermally Conductive Adhesive
Typical applications include bonding organic and ceramic substrates to heat sinks for electronic control modules in automotive applications. It is a two-part, gray, 1:1 mix ratio, heat cure, moderate flow, self-priming, thermally conductive adhesive.