[{"values":[{"value":"Português-ポルトガル語","languageCode":"pt-br","link":"javascript:void(0);"},{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"BR","default":"pt-br"},{"values":[{"value":"Português-ポルトガル語","languageCode":"pt-br","link":"javascript:void(0);"},{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"JP","default":"ja-jp"},{"values":[{"value":"Português-ポルトガル語","languageCode":"pt-br","link":"javascript:void(0);"},{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"CN","default":"zh-cn"},{"values":[{"value":"Português-ポルトガル語","languageCode":"pt-br","link":"javascript:void(0);"},{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"US","default":"en-us"}]

UNIGARD™ RE DFDA-1638 NT Flame Retardant Compound

A non-halogen, flame retardant, thermoplastic, low smoke, low corrosive, and low toxic compound. It has been designed for general purpose, medium and low voltage applications. If needed, standard color concentrates (EVA or PE based) can be used. Used as jacket, it is designed to pass the IEC-332-3, the IEEE-383/UL-1685 vertical tray cable burn tests. Cable construction, of course, plays an important role in flame performance. This product can be used as jacket for 90°C rated cables. DFDA-1638 Natural is also designed to maximize processing and flame performance. This compound can sustain extrusion temperatures up to 362°F (200°C) and can be extruded in typical single-flight metering PE screws, barrier screws, Maddock screws, and screws with mixing pins. Features this product provides the following features: - Highly flame retardant (VW-1, IEC-332-3, IEEE 383 flame test ratings) - Environmentally friendly (lead-free, halogen-free, sulfur/antimony-free) - Low smoke, low corrosivity, and low toxicity - UV stabilized - Contains copper inhibitor - Ease of extrusion and no special screw required - Good electrical properties, moisture resistance, and fluid resistance - Good balance of toughness and flexibility - Excellent cut-through, crush, and abrasion resistance - Colorable for insulation and jacket applications

物性

これらの値は一般特性を表すもので、規格ではありません。

  • Dielectric Constant はい いいえ 60 Hz - 3.42, 100 kHz - 3.49, 1 MHz - 3.42, 6 MHz - 3.34
  • Dissipation Factor はい いいえ 60 Hz - 3.7E-3, 100 kHz - 7.6E-3, 1 MHz - .014, 6 MHz - .016
  • Elongation はい いいえ 180 %
  • LOI-Limiting Oxygen Index はい いいえ 39 %
  • Tensile Strength in MPa (psi) はい いいえ 12.4 (1800), 12.4 (1800) Not at Yield
  • Volume Resistivity はい いいえ 3.5E+14 ohms-cm

この製品の有効な安全データシート(SDS)がありません
詳細については当社にお問い合わせください

選択された言語での当該製品の販売規格は見つかりません

UNIGARD™ RE DFDA-1638 NT Flame Retardant Compound
この製品の技術データシートはオンラインでは取得できません
詳細については当社にお問い合わせください

UNIGARD™ RE DFDA-1638 NT Flame Retardant Compound


この製品の法規関連データシートはオンラインでは取得できません


UNIGARD™ RE DFDA-1638 NT Flame Retardant Compound
この製品で利用可能な代理店オプションについて お問い合わせください