[{"values":[{"value":"Português-ポルトガル語","languageCode":"pt-br","link":"javascript:void(0);"},{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"BR","default":"pt-br"},{"values":[{"value":"Português-ポルトガル語","languageCode":"pt-br","link":"javascript:void(0);"},{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"JP","default":"ja-jp"},{"values":[{"value":"Português-ポルトガル語","languageCode":"pt-br","link":"javascript:void(0);"},{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"CN","default":"zh-cn"},{"values":[{"value":"Português-ポルトガル語","languageCode":"pt-br","link":"javascript:void(0);"},{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"US","default":"en-us"}]

SILASTIC™ MS-1002 Moldable Silicone A&B Kit

A medium viscosity, high Shore A hardness, two-part, 1 to 1 ratio, fast curing optical molding resin for producing fine detail with good resistance to environmental aging.

用途:

  • Injection or compression molding for primary or secondary lenses, light pipes, light guides and other optic devices

物性

これらの値は一般特性を表すもので、規格ではありません。

  • Color はい いいえ 無色透明
  • Dielectric Strength はい いいえ 475 volts per mil v/mil
  • Durometer - Shore A はい いいえ 74 Shore A
  • Elongation はい いいえ 80 %
  • Linear CTE はい いいえ 275 um/m/Deg C
  • Mixing Viscosity はい いいえ 26250 Centipoise
  • Number of Parts はい いいえ 2
  • Specific Gravity はい いいえ 1.07 kg/l
  • Specific Heat はい いいえ 1.37 J/Kg.K
  • Tensile Strength はい いいえ 1625 psi
  • Viscosity (Part A) はい いいえ 40000 mPa.s
  • Viscosity (Part B) はい いいえ 17900 mPa.s
  • Viscosity - Part A はい いいえ 40 Pa.s
  • Viscosity - Part B はい いいえ 17.9 Pa.s
  • Volume Resistivity はい いいえ 1.00E+18 ohm-centimeters
  • Working Time はい いいえ 2880 Minutes
  • Working Time in hrs at 25 Deg C はい いいえ 48
  • DOWSIL™ Primer-C OS

  • DOWSIL™ 1200 OS Primer
    An air drying primer supplied as a dilute solution of moisture reactive materials in volatile siloxane and is used to improve both the quality and speed of adhesion development to room temperature vulcanizing silicone sealants to a variety of common non-porous substrates.

  • SILASTIC™ MS-4002 Moldable Silicone A&B Kit

    This two-part, 1:1 ratio has high termal stability, comparatively high hardness and low surface tension, a smooth, low-tack, plastic-like surface, optically clear, and high light transmittance, with lower haze - Moldable Optical Silicone. 


  • SILASTIC™ MS-1003 Moldable Silicone A&B Kit
    A medium viscosity, medium Shore A hardness, two-part, 1 to 1 ratio, fast curing optical molding resin for producing fine detail with good resistance to environmental aging.

  • SILASTIC™ MS-4007 Moldable Silicone Kit

    An optically clear, medium viscosity, high Shore A hardness, two-part, 1:1 ratio, fast heat curing optical molding resin for producing optical parts with good resistance to environmental aging – Moldable Optical Silicone.


この製品の有効な安全データシート(SDS)がありません
詳細については当社にお問い合わせください

選択された言語での当該製品の販売規格は見つかりません

SILASTIC™ MS-1002 Moldable Silicone A&B Kit
この製品の技術データシートはオンラインでは取得できません
詳細については当社にお問い合わせください

SILASTIC™ MS-1002 Moldable Silicone A&B Kit


この製品の法規関連データシートはオンラインでは取得できません


SILASTIC™ MS-1002 Moldable Silicone A&B Kit
この製品で利用可能な代理店オプションについて お問い合わせください