物性

as.supplied.properties.Title

Appearance Grey white
Plasticity 200 mm/100

as.cured.properties.Title

Density 1.22 g/cm3
Durometer/Hardness, JIS Type A 50
Tear Strength Die-Angle 26 N/mm
Tensile Elongation 590 %
Tensile Strength 8.6 mPa

curing.condition.properties.Title

Curing Agent SILASTIC™ RC-4 50P FD Rubber Additive, 0.8 parts
Curing Condition, Molded 10min/170 °C
Curing Condition, Post-cured 4hours/200 °C