DOWSIL™ SM 8706 EX Emulsion
This product is general nonionic dimethyl silicone emulsion with base oil viscosity 80mm2/s. It can be chemically stable with acid or alkali contamination or under high temperature. It will form thin layer with cross-linker and catalyst. Fluid of dimethylsiloxane with -OH functionality emulsion, 37% active. It can be used for rubber and plastics release, textile softening, leveling, polish.
- DOWSIL™ BY 16-871
DOWSIL™ SH 8400 (NL) Fluid
This product can be used for both aqueous and non aqueous and can be used to improve wetting and leveling with small amount. Also, can be used for leather top coating for lubrication and scratch prevention purpose. A polyglycole modified polydimethyl siloxane.
DOWSIL™ FS-1224 Antifoam Emulsion
Industrial 30% actives antifoam emulsion. Useful in metal working fluids and textile processing applications; textile specific: useful in sizing, scouring, yarn hank dyeing, fabric beck dyeing and fabric finish applications.
DOWSIL™ SH 200 Fluid (5 cSt -300,000 cSt)
Polydimethylsiloxane fluid commonly used as a base fluid in personal care products due to its excellent spreading. clear, tasteless, essentially odorless and non-greasy. Benefits for personal care are soft feel and subtle skin lubricity, excellent spreading, leaves no residue or buildup, transient effect, nongreasy feel. Benefits for Industrial applications are little change in physical properties over a wide temperature span, a relatively flat viscosity, temperature slope, and serviceability from -40°C upt to 200°C, low surface tension, readily wets clean surfaces to impart water repellency and release characteristics. INCI name: Dimethicone
DOWSIL™ SH 8700 Fluid
Silicone Polyether. This product can be used to improve water absorption and softening performance of textile.
DOWSIL™ SH 200 Fluid 10,000 cSt
100% active, 10,000 cSt, polydimethylsiloxane polymer. INCI Name: Dimethicone
DOWSIL™ 67 Additive
Imparts leveling and wetting to water-borne and radiation-curable formulations on difficult substrates such as polyethylene, polypropylene, polyester and polyvinylchloride improves wetting and surface appearance of water-borne flexographic ink.