[{"values":[{"value":"Português do Brasil-ブラジルポルトガル語","languageCode":"pt-br","link":"javascript:void(0);"},{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"BR","default":"pt-br"},{"values":[{"value":"Português do Brasil-ブラジルポルトガル語","languageCode":"pt-br","link":"javascript:void(0);"},{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"JP","default":"ja-jp"},{"values":[{"value":"Português do Brasil-ブラジルポルトガル語","languageCode":"pt-br","link":"javascript:void(0);"},{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"CN","default":"zh-cn"},{"values":[{"value":"Português do Brasil-ブラジルポルトガル語","languageCode":"pt-br","link":"javascript:void(0);"},{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"US","default":"en-us"}]

DOWSIL™ SE 9188 RTV

A one-part, gray, non-flowing adhesive, fast tack-free with controlled volatility and good flame resistance.

物性

これらの値は一般特性を表すもので、規格ではありません。

  • Adhesion to はい いいえ 金属, プラスチック, セラミックの
  • Color はい いいえ グレー
  • Dielectric Constant at 100 Hz はい いいえ 3.4
  • Dielectric Strength はい いいえ 750 volts per mil v/mil
  • Dissipation Factor at 100 Hz はい いいえ 0.0003
  • Durometer - Shore A はい いいえ 34 Shore A
  • Elongation はい いいえ 400 %
  • Low Volatility はい いいえ true
  • Nonflowable はい いいえ true
  • Number of Parts はい いいえ 1
  • Primerless Adhesion はい いいえ プライマーレス
  • Room Temperature Cure - Hours はい いいえ 24 to 72 Hours
  • Shear はい いいえ 270 psi
  • Specific Gravity @ 25C はい いいえ 1.29
  • Tack-Free Time-50% RH はい いいえ 10 Minutes
  • Temperature Range はい いいえ -45 to 200 °C
  • Temperature Stable はい いいえ 高(黄変しにくい)
  • Tensile Strength はい いいえ 420 psi
  • Volume Resistivity はい いいえ 1e+015 ohm-centimeters
  • DOWSIL™ FA 4002 ID Silicone Acrylate
    A blend of ~40% acrylates / polytrimethylsiloxymethacrylate copolymer in isodecane. INCI Name: Isododecane (and) Acrylates / Polytrimethylsiloxymethacrylate Copolymer

  • DOWSIL™ HMW 2220 Non-Ionic Emulsion
    A 61 percent nonionic emulsion of a high molecular weight divinyldimethicone / dimethicone copolymer for use in skincare, suncare, shower gel, color cosmetic, and hair care applications. INCI Name: Divinyldimethicone / Dimethicone Copolymer (and) C12-13 Pareth-23 (and) C12-13 Pareth-3

  • DOWSIL™ 3145 RTV Mil-A-46146 Adhesive / Sealant

    One-part, moisture RTV, non-flow, high strength, UL and Mil Spec.


  • SYLGARD™ 527 A&B Silicone Dielectric Gel

    A two-part, 1 to 1 mix ratio dielectric gel that is suitable for sealing and protecting various electronic devices, especially those with delicate components.


  • SYLGARD™ 184 Silicone Elastomer Kit

    Two-part, clear, 10:1, RT and heat cure, good strength, UL and Mil Spec, same as SYLGARD™ 182 but with faster RT cure.


  • DOWSIL™ 7091 Adhesive Sealant
    High performance, neutral cure silicone adhesive/sealant.

  • DOWSIL™ SE 9187 L Adhesive

    One-part, black, clear or white, fast tack-free, controlled volatility adhesive with very low viscosity suitable for display module assembly, PCB protection (conformal coating) and general potting.


  • DOWSIL™ TC-4525 A/B

    A thermally Conductive Gap Filler offers thermal conductivity of 2.5W/m.K. This is a soft and compressible silicone material designed to dissipate heat from electronic modules by conducting it to a heat sink such as an aluminum housing. Excellent fit for automotive electronics and battery packs applications.


  • DOWSIL™ EP-9610 Cosmetic Powder
    A soft powder that provides unique smooth, bouncy and silky feel with optical effect and sebum control with easy processing for Color Cosmetics and Skin Care products.  INCI Name: Dimethicone Crosspolymer

  • DOWSIL™ 1200 OS Primer
    An air drying primer supplied as a dilute solution of moisture reactive materials in volatile siloxane and is used to improve both the quality and speed of adhesion development to room temperature vulcanizing silicone sealants to a variety of common non-porous substrates.

この製品の有効な安全データシート(SDS)がありません
詳細については当社にお問い合わせください

選択された言語での当該製品の販売規格は見つかりません

DOWSIL™ SE 9188 RTV
この製品にはテクニカルデータシートはございません
詳細については当社にお問い合わせください

Choose

DOWSIL™ SE 9188 RTV


この製品に関する規制データシートはございません


DOWSIL™ SE 9188 RTV
この製品で利用可能な代理店オプションについて お問い合わせください