DOWSIL™ SE 9184 White RTV

Designed to provide adhesion and thermal transfer for the cooling of various electrical components. It is a one-part, non-flowing thermally conductive adhesive, fast tack-free with controlled volatility and a UL V-0 flammability rating.



  • Adhesion to はい いいえ 金属, プラスチック, セラミックの
  • Color はい いいえ ホワイト
  • Dielectric Constant at 1MHz はい いいえ 4
  • Dielectric Strength はい いいえ 500 volts per mil v/mil
  • Durometer - Shore A はい いいえ 74 Shore A
  • Elongation はい いいえ 60 %
  • Low Volatility はい いいえ true
  • Nonflowable はい いいえ true
  • Nonvolatile Content はい いいえ 98.9 %
  • Number of Parts はい いいえ 1
  • Primerless Adhesion はい いいえ プライマーレス
  • Resistance Type はい いいえ 熱抵抗
  • Room Temperature Cure - Hours はい いいえ 24 to 72 Hours
  • Shear はい いいえ 245 psi
  • Specific Gravity @ 25C はい いいえ 2.2
  • Tack-Free Time-50% RH はい いいえ 3 Minutes
  • Temperature Range はい いいえ -45 to 200 °C
  • Temperature Stable はい いいえ 高(黄変しにくい)
  • Tensile Strength はい いいえ 460 psi
  • Volume Resistivity はい いいえ 1.5e+015 ohm-centimeters
  • DOWSIL™ SE 1816 CV Kit
    Two-part, 1:1, addition cure, black, UL V-0, controlled volatility, self-priming, long working time with moderate temp cure.

  • XIAMETER™ AFE-0310 Antifoam Emulsion

    30% active silicone emulsion designed to control foam in aqueous systems over wide pH ranges. Recommended for industrial applications such as gas scrubbing (amine or carbonate), gas drying (glycol), pesticide manufacture and other crop protection products.

  • DOWSIL™ ES-5300 Formulation Aid
    A non diluted silicone surfactant with higher oil phase flexibility. Designed to produce stable water-in-silicone emulsions and water-in-oil emulsions with light sensory. INCI Name: Lauryl PEG-10 Tris(Trimethylsiloxy)silylethyl Dimethicone

  • DOWSIL™ 8590 Additive
    A silicone foam control agent for waterborne coatings. It shows excellent defoaming performance in waterborne coatings and ink systems and has a low tendency to cause surface defects.

  • SYLGARD™ 184 Silicone Elastomer Kit

    Two-part, clear, 10:1, RT and heat cure, good strength, UL and Mil Spec, same as SYLGARD™ 182 but with faster RT cure.

  • DOWSIL™ SE 9186 Sealant
    One-part, moisture cure RTV, flowable, fast tack-free, controlled volatility.

  • DOWSIL™ SE 9187 L Adhesive

    One-part, black, clear or white, fast tack-free, controlled volatility adhesive with very low viscosity suitable for display module assembly, PCB protection (conformal coating) and general potting.

  • DOWSIL™ VM-2270 Aerogel Fine Particles
    A white free-flowing powder that is 100 percent hydrophobic for use in hair care, skincare, fragrance delivery, and antiperspirants / deodorants. INCI Name: Silica Silylate

  • DOWSIL™ 7091 Adhesive Sealant
    High performance, neutral cure silicone adhesive/sealant.

  • VORASURF™ DC 5043 Additive

    Standard, general-purpose surfactant for HR slabstock and molded TDI foams can be used in microcellular foam.



DOWSIL™ SE 9184 White RTV


DOWSIL™ SE 9184 White RTV


DOWSIL™ SE 9184 White RTV
この製品で利用可能な代理店オプションについて お問い合わせください