DOWSIL™ SE 4485 L Thermally Conductive Adhesive
DOWSIL™ SE 4486 Thermally Conductive Adhesive
Designed to provide efficient thermal transfer for the cooling of electronic modules, including home appliance devices. It is a one-part, white, moisture cure RTV, highly flowable, fast tack-free, high thermally conductive adhesive with controlled volatility.
DOWSIL™ SE 4485 Thermally Conductive Adhesive
Designed to provide efficient thermal transfer for the cooling of electronics modules, including lamp, telecom, and power supply devices. It is a one-part, white, moisture cure, thermal conductivity silicone adhesive.
DOWSIL™ 1-2577 Conformal Coating
One-part, transparent medium viscosity conformal coating with firm, abrasion resistant surface after cure.
DOWSIL™ SE 9189 L RTV
One-part, white or gray, moisture cure RTV, good flow, fast tack-free, controlled volatility, UL V-0.
DOWSIL™ TC-4525 A/B
A thermally Conductive Gap Filler offers thermal conductivity of 2.5W/m.K. This is a soft and compressible silicone material designed to dissipate heat from electronic modules by conducting it to a heat sink such as an aluminum housing. Excellent fit for automotive electronics and battery packs applications.
DOWSIL™ 1-2577 Low VOC Conformal Coating
One-part, clear, RTV cure with mild heat acceleration possible, hard slick finish with abrasion resistance, solvent-borne (VOC exempt in many areas), UL and Mil Spec, contains UV indicator.
DOWSIL™ 3140 RTV Coating
One-part, translucent adhesive or coating with good flowability, high elongation value for vibration/ mechanical shock dampening and low stress, good flame resistance, UL, IPC and Mil Spec tested, contains UV indicator.
DOWSIL™ 3145 RTV Mil-A-46146 Adhesive / Sealant
One-part, moisture RTV, non-flow, high strength, UL and Mil Spec.