[{"values":[{"value":"Português do Brasil-ブラジルポルトガル語","languageCode":"pt-br","link":"javascript:void(0);"},{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"BR","default":"pt-br"},{"values":[{"value":"Português do Brasil-ブラジルポルトガル語","languageCode":"pt-br","link":"javascript:void(0);"},{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"JP","default":"ja-jp"},{"values":[{"value":"Português do Brasil-ブラジルポルトガル語","languageCode":"pt-br","link":"javascript:void(0);"},{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"CN","default":"zh-cn"},{"values":[{"value":"Português do Brasil-ブラジルポルトガル語","languageCode":"pt-br","link":"javascript:void(0);"},{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"US","default":"en-us"}]

DOWSIL™ SE 4445 CV Kit

Two-part, grey, 1:1, addition cure gel, good thermal conductivity, controlled volatility, UL 94 V-0.

物性

これらの値は一般特性を表すもので、規格ではありません。

  • Adhesion to はい いいえ 金属, アルミニウム, プラスチック, FR4, セラミックの
  • Color はい いいえ グレー
  • Cure Type はい いいえ 付加型硬化
  • Dielectric Constant at 1MHz はい いいえ 6.2
  • Dielectric Strength はい いいえ 127 volts per mil v/mil
  • Dynamic Viscosity はい いいえ 15025 Centipoise
  • Flowable はい いいえ true
  • Heat Cure はい いいえ 45 Minutes @ 125 Deg C
  • Hydrophobic はい いいえ true
  • Low Odor はい いいえ true
  • Number of Parts はい いいえ 2
  • Polyesters はい いいえ true
  • Primerless Adhesion はい いいえ プライマーレス
  • Resistance Type はい いいえ 耐酸化性, 耐オゾン性, 耐溶剤性, 熱抵抗, UV抵抗, 耐水性
  • Self Leveling はい いいえ true
  • Shelf Life はい いいえ 183 Days
  • Specific Gravity @ 25C はい いいえ 2.36
  • Temperature Range はい いいえ -45 to 150 °C
  • Temperature Stable はい いいえ 高(黄変しにくい), 低
  • Thermal Conductivity はい いいえ 1.34 Watts per meter K
  • Volume Resistivity はい いいえ 7e+015 ohm-centimeters
  • Water Resistant はい いいえ true
  • Worked Penetration はい いいえ 50 mm/10
  • Working Time はい いいえ 300 Minutes
  • DOWSIL™ OS- 20
    An ozone-safe volatile methylsiloxane (VMS) fluid developed specifically for use as a precision cleaning agent and carrier.

  • DOWSIL™ EA-6060 Adhesive A&B

     A two-part, non-flowing silicone adhesive enabling assembly production savings due to a fast cure at moderate temperature. 


  • DOWSIL™ Q1-9226 Thermally Conductive Adhesive
    Typical applications include bonding organic and ceramic substrates to heat sinks for electronic control modules in automotive applications. It is a two-part, gray, 1:1 mix ratio, heat cure, moderate flow, self-priming, thermally conductive adhesive.

  • DOWSIL™ SE 9168 RTV

    One-part, grey, moisture cure RTV, non-flowing, fast tack-free, controlled volatility, UL V-0, controlled volatility-reducing the potential of volatiles affecting surrounding components.


  • DOWSIL™ 3-6265 HP Adhesive

    High performance version of 3-6265 adhesive, especially minimizing voids.


  • DOWSIL™ 3-1965 Conformal Coating
    One-part, clear, fast moisture RTV cure with mild heat acceleration possible, low viscosity, soft, stress-relieving, contains UV indicator.

  • DOWSIL™ 7091 Adhesive Sealant
    High performance, neutral cure silicone adhesive/sealant.

  • DOWSIL™ 1-2577 Low VOC Conformal Coating
    One-part, clear, RTV cure with mild heat acceleration possible, hard slick finish with abrasion resistance, solvent-borne (VOC exempt in many areas), UL and Mil Spec, contains UV indicator.

  • DOWSIL™ TC-2035 Adhesive A/B Kit
    Two-part heat cure silicone highly thermally conductive adhesive with low bond line thickness.

  • DOWSIL™ EI-1184 Optical Encapsulant
    A 1:1 mix ratio, fast curing, 2-part silicone encapsulant suitable for encapsulating rigid and flexible circuit boards indoor and outdoor LED Lighting applications.

この製品の有効な安全データシート(SDS)がありません
詳細については当社にお問い合わせください

選択された言語での当該製品の販売規格は見つかりません

DOWSIL™ SE 4445 CV Kit
この製品にはテクニカルデータシートはございません
詳細については当社にお問い合わせください

DOWSIL™ SE 4445 CV Kit


この製品に関する規制データシートはございません


DOWSIL™ SE 4445 CV Kit
この製品で利用可能な代理店オプションについて お問い合わせください