DOWSIL™ FZ-2166
一緒に頻繁に購入されるもの
-
SYLGARD™ 527 A&B Silicone Dielectric Gel
A two-part, 1 to 1 mix ratio dielectric gel that is suitable for sealing and protecting various electronic devices, especially those with delicate components.
-
DOWSIL™ 902 RCS Joint Sealant Parts A&B
A self-leveling, cold-applied, rapid-cure, two-part, easy-to-install, ultra-low-modulus, 100 percent silicone rubber sealant designed to seal expansion joints that experience both thermal and/or vertical movements due to traffic loading.
-
SYLGARD™ 184 Silicone Elastomer Kit
Two-part, clear, 10:1, RT and heat cure, good strength, UL and Mil Spec, same as SYLGARD™ 182 but with faster RT cure.
-
DOWSIL™ 1200 OS Primer
An air drying primer supplied as a dilute solution of moisture reactive materials in volatile siloxane and is used to improve both the quality and speed of adhesion development to room temperature vulcanizing silicone sealants to a variety of common non-porous substrates.
-
DOWSIL™ TC-4525 A/B
A thermally Conductive Gap Filler offers thermal conductivity of 2.5W/m.K. This is a soft and compressible silicone material designed to dissipate heat from electronic modules by conducting it to a heat sink such as an aluminum housing. Excellent fit for automotive electronics and battery packs applications.
-
DOWSIL™ 2501 Cosmetic Wax
A water-dispersible dimethicone copolyol wax for use in skincare, woundcare, haircare, suncare, and antiperspirants and deodorant applications. INCI Name: Bis-PEG-18 Methyl Ether Dimethyl Silane
-
DOWSIL™ 2503 Cosmetic Wax
An alkylmethylsiloxane wax which melts on contact with skin and provides moisturizing benefits for hand lotions, body creams, facial treatments, suncare creams / lotions, woundcare, scar therapy treatments, and other color cosmetics. INCI Name: Stearyl Dimethicone (and) Octadecene
-
DOWSIL™ SE 9187 L Adhesive
One-part, black, clear or white, fast tack-free, controlled volatility adhesive with very low viscosity suitable for display module assembly, PCB protection (conformal coating) and general potting.
-
DOWSIL™ 593 Fluid
Blend of polydimethylsiloxane and high molecular weight silicone resin that acts as a film former to provide water-repellency, wash-off resistance and durability in sun care, color cosmetics and lip stick formulations. INCI Name: Dimethicone (and) Trimethylsiloxysilicate
-
DOWSIL™ HMW 2220 Non-Ionic Emulsion
A 61 percent nonionic emulsion of a high molecular weight divinyldimethicone / dimethicone copolymer for use in skincare, suncare, shower gel, color cosmetic, and hair care applications. INCI Name: Divinyldimethicone / Dimethicone Copolymer (and) C12-13 Pareth-23 (and) C12-13 Pareth-3
この製品の有効な安全データシート(SDS)がありません 詳細については当社にお問い合わせください。
この製品の有効な安全データシート(SDS)がありません
詳細については当社にお問い合わせください。