DOWSIL™ EA-9189 RTV
1-part, fast tack free, flowable silicone adhesive with controlled volatility and good flame resistance.
物性
これらの値は一般特性を表すもので、規格ではありません。
- Adhesion to はい いいえ 金属, プラスチック, セラミックの
- Color はい いいえ ホワイト
- Cure Type はい いいえ 縮合硬化
- Dielectric Constant at 100 Hz はい いいえ 3.2
- Dielectric Constant at 100 kHz はい いいえ 2.7
- Dielectric Strength (kV/mm) はい いいえ 20 kV/mm
- Dissipation Factor at 100 Hz はい いいえ 0.08
- Dissipation Factor at 100 kHz はい いいえ 0.1
- Durometer - Shore D はい いいえ 63 Shore D
- Elongation はい いいえ 50 %
- Hydrophobic はい いいえ true
- Low Odor はい いいえ true
- Low Volatility はい いいえ true
- Non-Slump はい いいえ true
- Nonflowable はい いいえ true
- Number of Parts はい いいえ 1
- Primerless Adhesion はい いいえ プライマーレス
- Resistance Type はい いいえ 耐酸化性, 耐オゾン性, 耐溶剤性, 熱抵抗, UV抵抗, 耐水性
- Shear はい いいえ 260 psi
- Shelf Life はい いいえ 270 Days
- Solventless はい いいえ true
- Specific Gravity @ 25C はい いいえ 1.71
- Temperature Range はい いいえ -45 to 150 °C
- Temperature Stable はい いいえ 高(黄変しにくい), 低
- Tensile Strength はい いいえ 375 psi
- Thixotropic はい いいえ true
- Volume Resistivity はい いいえ 8.33 ohm-centimeters
- Water Resistant はい いいえ true
一緒に頻繁に購入されるもの
-
DOWSIL™ 1-2577 Conformal Coating
One-part, transparent medium viscosity conformal coating with firm, abrasion resistant surface after cure.
-
DOWSIL™ 7091 Adhesive Sealant
High performance, neutral cure silicone adhesive/sealant.
-
SYLGARD™ 184 Silicone Elastomer Kit
Two-part, clear, 10:1, RT and heat cure, good strength, UL and Mil Spec, same as SYLGARD™ 182 but with faster RT cure.
-
DOWSIL™ 1200 OS Primer
An air drying primer supplied as a dilute solution of moisture reactive materials in volatile siloxane and is used to improve both the quality and speed of adhesion development to room temperature vulcanizing silicone sealants to a variety of common non-porous substrates.
-
DOWSIL™ 7094 Flowable Sealant
A black, low modulus silicone adhesive/sealant designed for applications where a flowable product and non corrosive cure with durable adhesion to a variety of substrates is required.
-
DOWSIL™ 3145 RTV Mil-A-46146 Adhesive / Sealant
One-part, moisture RTV, non-flow, high strength, UL and Mil Spec.
-
DOWSIL™ TC-4525 A/B
A thermally Conductive Gap Filler offers thermal conductivity of 2.5W/m.K. This is a soft and compressible silicone material designed to dissipate heat from electronic modules by conducting it to a heat sink such as an aluminum housing. Excellent fit for automotive electronics and battery packs applications.
-
DOWSIL™ 3140 RTV Coating
One-part, translucent adhesive or coating with good flowability, high elongation value for vibration/ mechanical shock dampening and low stress, good flame resistance, UL, IPC and Mil Spec tested, contains UV indicator.
-
DOWSIL™ 340 Heat Sink Compound
White, non-flowing, highly filled compound, good thermal conductivity.
-
DOWSIL™ SE 9186 Sealant
One-part, moisture cure RTV, flowable, fast tack-free, controlled volatility.
この製品の有効な安全データシート(SDS)がありません 詳細については当社にお問い合わせください。
この製品の有効な安全データシート(SDS)がありません
詳細については当社にお問い合わせください。