[{"values":[{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"JP","default":"ja-jp"},{"values":[{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"CN","default":"zh-cn"},{"values":[{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"US","default":"en-us"}]

DOWSIL™ 3-8259 RF Silicone Foam Kit

A two part, room temperature silicone foam system designed to be dispensed and cured directly on parts to form an integrated compression gasket.

物性

これらの値は一般特性を表すもので、規格ではありません。

  • Color - Part B はい いいえ 半透明
  • Durometer - Shore 00 はい いいえ 50 Shore 00
  • Shelf Life はい いいえ 360 Days
  • Tack-Free Time-50% RH はい いいえ < 10 Minutes
  • Temperature Stable はい いいえ 高(黄変しにくい), 低
  • Viscosity (Part A) はい いいえ 35000 to 70000 mPa.s
  • Viscosity (Part B) はい いいえ 20000 to 70000 mPa.s
  • DOWSIL™ 995 Silicone Structural Sealant
    A one-component, self-priming, shelf-stable, neutral-cure, elastomeric adhesive specifically formulated for silicone structural glazing and exhibits excellent unprimed adhesion to most building substrates. This product has superior unprimed adhesion for structural glazing applications for hurricane or impact rated windows and doors. It has a movement capability of +/- 50%.

  • DOWSIL™ 791 Weatherproofing Sealant
    A one-part, medium-modulus, elastomeric sealant designed for general weathersealing. It is a silicone formulation that cures to a flexible and curable silicone rubber building joint seal.

  • DOWSIL™ 983 Structural Glazing Sealant Base and Curing Agent

    Designed for specialized use where dual structural and weatherseal applications are desired for factory glazing and curtainwall production. Once cured, this structural sealant forms a durable, flexible, watertight bond that can be warranted for 20 years and used in ±25% movement weatherseal applications. It has excellent unprimed adhesion to glass, alodine, and anodized aluminum1, although DOWSIL™ Primer-C OS is recommended for fast and consistent adhesion, especially to high-performance substrates approved for architectural structural glazing applications.


  • DOWSIL™ 1200 OS Primer
    An air drying primer supplied as a dilute solution of moisture reactive materials in volatile siloxane and is used to improve both the quality and speed of adhesion development to room temperature vulcanizing silicone sealants to a variety of common non-porous substrates.

  • DOWSIL™ 7091 Adhesive Sealant
    High performance, neutral cure silicone adhesive/sealant.

  • SYL-OFF™ 4000 Catalyst
    General purpose catalyst which is compatible with all Syl-off® brand solvent based and solventless release coating systems as well as Plantinum cure silicone PSAs.

  • DOWSIL™ Primer-C OS

  • DOWSIL™ 790 Silicone Building Sealant
    A one-part silicone formulation that cures in the presence of atmospheric moisture to produce a durable, fire-resistant, flexible and ultra-low-modulus silicone rubber building joint seal.

  • DOWSIL™ 123 Silicone Seal-All Colors

    A pre-formed, ultra-low modulus silicone extrusion that is bonded to substrates using DOWSIL™ 791 Silicone Perimeter Sealant or DOWSIL™ 795 Silicone Building Sealant. This product can be used in both new and remedial construction applications.


  • DOWSIL™ Q1-9226 Thermally Conductive Adhesive
    Typical applications include bonding organic and ceramic substrates to heat sinks for electronic control modules in automotive applications. It is a two-part, gray, 1:1 mix ratio, heat cure, moderate flow, self-priming, thermally conductive adhesive.

類似製品

  • DOWSIL™ 3-8209 Silicone Foam
    A two part, room temperature silicone foam system designed to be dispensed and cured directly on parts to form an integrated compression gasket. It is low to medium hardness product, primarily developed as a dispensed ‘foamed-in-place’ gasket material for the automotive and industrial assembly & maintenance industries.

  • SILASTIC™ 8257 Silicone Foam
    A two-part, room temperature curing silicone foam system designed to be dispensed and cured directly on parts to form an integrated compression gasket.

  • DOWSIL™ 3-8219 RF Silicone Foam Kit
    A two part, room temperature silicone foam system designed to be dispensed and cured directly on parts to form an integrated compression gasket. It is reduced-flow medium hardness product, primarily developed as a dispensed ‘foamed-in-place’ gasket material for the automotive and industrial assembly & maintenance industries.

この製品の有効な安全データシート(SDS)がありません
詳細については当社にお問い合わせください

選択された言語での当該製品の販売規格は見つかりません

DOWSIL™ 3-8259 RF Silicone Foam Kit
この製品にはテクニカルデータシートはございません
詳細については当社にお問い合わせください

DOWSIL™ 3-8259 RF Silicone Foam Kit


この製品に関する規制データシートはございません


DOWSIL™ 3-8259 RF Silicone Foam Kit
この製品で利用可能な代理店オプションについて お問い合わせください