DOWSIL™ 280A Adhesive
物性
これらの値は一般特性を表すもので、規格ではありません。
- Color はい いいえ 半透明
- Dielectric Constant at 100 Hz はい いいえ 2.95
- Dielectric Constant at 100 kHz はい いいえ 2.9
- Dielectric Strength はい いいえ 900 volts per mil v/mil
- Dissipation Factor at 100 Hz はい いいえ 0.004
- Dissipation Factor at 100 kHz はい いいえ 0.003
- Flash Point, Closed Cup はい いいえ 27 °C
- Nonvolatile Content はい いいえ 57 %
- Shelf Life はい いいえ 270 Days
- Specific Gravity @ 25C はい いいえ 0.98
- Viscosity はい いいえ 38900 mPa.s
- Volume Resistivity はい いいえ 4e+013 ohm-centimeters
一緒に頻繁に購入されるもの
-
XIAMETER™ PMX-200 Silicone Fluid 10 cSt
100% active, 10 cSt, polydimethylsiloxane polymer. INCI Name: Dimethicone
-
DOWSIL™ VM-2270 Aerogel Fine Particles
A white free-flowing powder that is 100 percent hydrophobic for use in hair care, skincare, fragrance delivery, and antiperspirants / deodorants. INCI Name: Silica Silylate
-
DOWSIL™ FZ-3196 Fluid
Aunique solution for formulators of skin care, sun care, or color cosmetic products. Caprylyl Methicone combines a light, silky feel, excellent spreadability and moderate volatility with excellent compatibility with a wide range of cosmetic ingredients (such as natural oils), of which it improves the overall sensory profile by reducing greasiness and tackiness. It is a caprylyl branched trisiloxane. The siloxane consists of three silicon atoms which is the shortest Dimethicone, and octyl group is attached on the middle silicon. INCI Name: Caprylyl Methicone
-
DOWSIL™ 556 Cosmetic Grade Fluid
A polyphenylmethylsiloxane for use in skincare, suncare, color cosmetic, hair care, and antiperspirant / deodorant applications. INCI Name: Phenyl Trimethicone
-
XIAMETER™ PMX-200 Silicone Fluid 5 cSt
100% active, 5 cSt, polydimethylsiloxane polymer. INCI Name: Dimethicone
-
DOWSIL™ HMW 2220 Non-Ionic Emulsion
A 61 percent nonionic emulsion of a high molecular weight divinyldimethicone / dimethicone copolymer for use in skincare, suncare, shower gel, color cosmetic, and hair care applications. INCI Name: Divinyldimethicone / Dimethicone Copolymer (and) C12-13 Pareth-23 (and) C12-13 Pareth-3
-
SYL-OFF™ 40 Release Modifier
Solventless release modifier that provides highly effective release modification at both low and high peel speeds.
-
DOWSIL™ 7657 Adhesive
A solvent-base silicone pressure sensitive adhesive, when used with Syl-Off® 4000 Catalyst, offers the ability to prepare pressure sensitive tape constructions at low curing temperatures.
-
XIAMETER™ PMX-200 Silicone Fluid 350 cSt
100% active, 350 cSt, polydimethylsiloxane polymer. INCI Name: Dimethicone
-
SYL-OFF™ 4000 Catalyst
General purpose catalyst which is compatible with all Syl-off® brand solvent based and solventless release coating systems as well as Plantinum cure silicone PSAs.
この製品の有効な安全データシート(SDS)がありません 詳細については当社にお問い合わせください。
この製品の有効な安全データシート(SDS)がありません
詳細については当社にお問い合わせください。