DOWSIL™ 1-4174 Thermally Conductive Adhesive

One-part, grey, heat cure, thermally conductive, low flow, same as 1-4173 with 7 mil (178 micron) spacer beads, self-priming.

物性

これらの値は一般特性を表すもので、規格ではありません。

Adhesion to はいいいえ金属, アルミニウム, プラスチック, FR4, セラミックの
Color はいいいえグレー
Cure Type はいいいえ付加型硬化
Dielectric Constant at 100 kHz はいいいえ 4.65
Dielectric Strength はいいいえ 400 volts per mil v/mil
Dissipation Factor at 100 kHz はいいいえ 0.0021
Durometer - Shore A はいいいえ 92 Shore A
Dynamic Viscosity はいいいえ 62300 Centipoise
Flowable はいいいえ true
Heat Cure はいいいえ 90 Minutes @ 100 Deg C, 30 Minutes @ 125 Deg C, 20 Minutes @ 150 Deg C
Hydrophobic はいいいえ true
Low Odor はいいいえ true
Number of Parts はいいいえ 1
Polyesters はいいいえ true
Primerless Adhesion はいいいえプライマーレス
Resistance Type はいいいえ耐酸化性, 耐オゾン性, 耐溶剤性, 熱抵抗, UV抵抗, 耐水性
Self Leveling はいいいえ true
Shear はいいいえ 646 psi
Shelf Life はいいいえ 180 Days
Solventless はいいいえ true
Specific Gravity @ 25C はいいいえ 2.71
Temperature Range はいいいえ -45 to 200 °C
Temperature Stable はいいいえ高（黄変しにくい）, 低
Thermal Conductivity はいいいえ 1.78 Watts per meter K
Thermosetting はいいいえ true
Volume Resistivity はいいいえ 1.9e+014 ohm-centimeters
Water Resistant はいいいえ true

DOWSIL™ TC-2035 Adhesive A/B Kit
Two-part heat cure silicone highly thermally conductive adhesive with low bond line thickness.

DOWSIL™ 1200 OS Primer
An air drying primer supplied as a dilute solution of moisture reactive materials in volatile siloxane and is used to improve both the quality and speed of adhesion development to room temperature vulcanizing silicone sealants to a variety of common non-porous substrates.

DOWSIL™ 7091 Adhesive Sealant
High performance, neutral cure silicone adhesive/sealant.

DOWSIL™ Q1-9226 Thermally Conductive Adhesive
Typical applications include bonding organic and ceramic substrates to heat sinks for electronic control modules in automotive applications. It is a two-part, gray, 1:1 mix ratio, heat cure, moderate flow, self-priming, thermally conductive adhesive.

DOWSIL™ 1-4173 Thermally Conductive Adhesive
One-part gray, flowable thermally conductive adhesive with high tensile strength.

SILASTIC™ Q3-3636 Adhesive (Base & Catalyst)
Two-part, low fogging RTV adhesive for headlamps (plastic and metal bonding).

DOWSIL™ 3-1953 Conformal Coating
One-part, translucent, fast moisture RTV cure with mild heat acceleration possible, soft, stress-relieving, contains UV indicator.

DOWSIL™ TC-4525 A/B
A thermally Conductive Gap Filler offers thermal conductivity of 2.5W/m.K. This is a soft and compressible silicone material designed to dissipate heat from electronic modules by conducting it to a heat sink such as an aluminum housing. Excellent fit for automotive electronics and battery packs applications.

SYLGARD™ 527 A&B Silicone Dielectric Gel
A two-part, 1 to 1 mix ratio dielectric gel that is suitable for sealing and protecting various electronic devices, especially those with delicate components.

DOWSIL™ 3-6265 Thixotropic Adhesive
One-part, black, heat cure, high strength, self-priming, contains UV indicator, non-flowing version of 3-6611. Suitable for use in automotive and industrial assembly areas including sealing lids and housings, attaching base plates gasket, and connector sealing.