[{"values":[{"value":"Português do Brasil-ブラジルポルトガル語","languageCode":"pt-br","link":"javascript:void(0);"},{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"BR","default":"pt-br"},{"values":[{"value":"Português do Brasil-ブラジルポルトガル語","languageCode":"pt-br","link":"javascript:void(0);"},{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"JP","default":"ja-jp"},{"values":[{"value":"Português do Brasil-ブラジルポルトガル語","languageCode":"pt-br","link":"javascript:void(0);"},{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"CN","default":"zh-cn"},{"values":[{"value":"Português do Brasil-ブラジルポルトガル語","languageCode":"pt-br","link":"javascript:void(0);"},{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"US","default":"en-us"}]

DOWSIL™ X3-6211 Encapsulant

One-part, clear, UV cure.

物性

これらの値は一般特性を表すもので、規格ではありません。

  • Adhesion to はい いいえ 金属, アルミニウム, プラスチック, FR4, セラミックの
  • Color はい いいえ 透明
  • Cure Type はい いいえ 付加型硬化
  • Dielectric Strength はい いいえ 425 volts per mil v/mil
  • Dynamic Viscosity はい いいえ 925 Centipoise
  • Flowable はい いいえ true
  • Gel Hardness はい いいえ 105 Grams/Penetration (1
  • Hydrophobic はい いいえ true
  • Linear CTE はい いいえ 430 um/m/Deg C
  • Low Odor はい いいえ true
  • Number of Parts はい いいえ 1
  • Optically Clear はい いいえ true
  • Polyesters はい いいえ true
  • Primerless Adhesion はい いいえ プライマーレス
  • Resistance Type はい いいえ 耐酸化性, 耐オゾン性, 熱抵抗, UV抵抗, 耐水性
  • Self Leveling はい いいえ true
  • Shelf Life はい いいえ 365 Days
  • Soft Gel はい いいえ true
  • Soft Stress Relieving はい いいえ true
  • Solventless はい いいえ true
  • Specific Gravity @ 25C はい いいえ 0.99
  • Temperature Range はい いいえ -80 to 150 °C
  • Temperature Stable はい いいえ 高(黄変しにくい), 低
  • Thermosetting はい いいえ true
  • Unworked Penetration はい いいえ 45 mm/10
  • UV Cure はい いいえ true
  • Water Resistant はい いいえ true
  • DOWSIL™ 3-1944 RTV Coating
    One-part, translucent, moisture RTV, moderate flow, fast tack-free, contains UV indicator, UL 746 and Mil Spec tested.

  • DOWSIL™ 3140 RTV Coating
    One-part, translucent adhesive or coating with good flowability, high elongation value for vibration/ mechanical shock dampening and low stress, good flame resistance, UL, IPC and Mil Spec tested, contains UV indicator.

  • DOWSIL™ 1200 OS Primer
    An air drying primer supplied as a dilute solution of moisture reactive materials in volatile siloxane and is used to improve both the quality and speed of adhesion development to room temperature vulcanizing silicone sealants to a variety of common non-porous substrates.

  • SYLGARD™ 184 Silicone Elastomer Kit

    Two-part, clear, 10:1, RT and heat cure, good strength, UL and Mil Spec, same as SYLGARD™ 182 but with faster RT cure.


  • DOWSIL™ 3165 Fast Tack RTV Adhesive Sealant
    One-part, gray, moisture RTV, fast cure, UL.

  • DOWSIL™ 1-2577 Low VOC Conformal Coating
    One-part, clear, RTV cure with mild heat acceleration possible, hard slick finish with abrasion resistance, solvent-borne (VOC exempt in many areas), UL and Mil Spec, contains UV indicator.

  • SYLGARD™ 527 A&B Silicone Dielectric Gel

    A two-part, 1 to 1 mix ratio dielectric gel that is suitable for sealing and protecting various electronic devices, especially those with delicate components.


  • DOWSIL™ TC-3015 Re-workable Thermal Gel

    A one part, heat cure silicone based thermally conductive gel with good re-workability. It’s supplied as non-flowable paste and can be pressed lower to 100 um thickness in thermal management application. It can be cured to elastic pad with certain tensile strength and elongation which can make sure the material can be peeled off easily and completely without residue in rework process.


  • SILASTIC™ MS-1002 Moldable Silicone A&B Kit
    A medium viscosity, high Shore A hardness, two-part, 1 to 1 ratio, fast curing optical molding resin for producing fine detail with good resistance to environmental aging.

  • DOWSIL™ EE-3200 Low Stress Silicone Encapsulant
    Has a very low hardness and viscosity to minimize internal stress generation, fill small gaps, and improve manufacturing speed for complex and high volume electronic devices.

この製品の有効な安全データシート(SDS)がありません
詳細については当社にお問い合わせください

選択された言語での当該製品の販売規格は見つかりません

DOWSIL™ X3-6211 Encapsulant
この製品にはテクニカルデータシートはございません
詳細については当社にお問い合わせください

DOWSIL™ X3-6211 Encapsulant


この製品に関する規制データシートはございません


DOWSIL™ X3-6211 Encapsulant
この製品で利用可能な代理店オプションについて お問い合わせください