[{"values":[{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"JP","default":"ja-jp"},{"values":[{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"CN","default":"zh-cn"},{"values":[{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"US","default":"en-us"}]

DOW™ LDPE 780E Low Density Polyethylene Resin

Can be readily processed using conventional injection moulding techniques utilising melt temperatures between 140 and 250°C, a mould temperature between 10 and 50°C, and injection pressure between 50 and 150 MPa. When properly injection moulded, 780E Low Density Polyethylene Resin exhibit: - Excellent flow - Good rigidity - Good surface gloss. The purchaser remains responsible for determining whether the use complies with all relevant regulations. Applications: - Housewares. - Toys & leisures. - Containers. - Compounding.

物性

これらの値は一般特性を表すもので、規格ではありません。

  • Density (ASTM D792) はい いいえ 0.923 g/cm3
  • Impact Strength in MPa (psi) はい いいえ 286 kJ/m2 (136 ft lb/in2) ASTM D1822
  • Melt Index (g/10min @190°C/21.6 kg) はい いいえ 20
  • Tensile Elongation at Break, MD はい いいえ 700 %
  • Tensile Elongation at Break, TD はい いいえ 750 %
  • Vicat Softening Point in °C(°F) はい いいえ 93°C (199°F)

この製品の有効な安全データシート(SDS)がありません
詳細については当社にお問い合わせください

選択された言語での当該製品の販売規格は見つかりません

DOW™ LDPE 780E Low Density Polyethylene Resin
この製品にはテクニカルデータシートはございません
詳細については当社にお問い合わせください

DOW™ LDPE 780E Low Density Polyethylene Resin


この製品に関する規制データシートはございません


DOW™ LDPE 780E Low Density Polyethylene Resin
この製品で利用可能な代理店オプションについて お問い合わせください