[{"values":[{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"JP","default":"ja-jp"},{"values":[{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"CN","default":"zh-cn"},{"values":[{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"US","default":"en-us"}]

DOW™ LDPE 450E Low Density Polyethylene Resin

This product has been designed with an optimum balance of melt strength and drawability to give excellent performance in cast film, foam, blown film and bubble film extrusion. When properly fabricated, the product displays: excellent processability low neck-down (cast film) very good toughness and impact properties and good tear strength. In foam extrusion, This product gives an ideal balance between cell growth and stabilization to allow the production of very low density products without voids. Main Characteristics: - Cast film - Foam - Bubble film - General purpose blown film. Slip Additive: None Antiblock Additive: None

物性

これらの値は一般特性を表すもので、規格ではありません。

  • Dart Drop Impact (ASTM D1709A) in grams (lbs) 110 g
  • Density (ASTM D792) 0.923 g/cm3
  • Elmendorf Tear Strength, MD (ASTM D1922) in grams (lbs) 430 g
  • Elmendorf Tear Strength, TD (ASTM D1922) in grams (lbs) 370 g
  • Gloss (45 degree) 66 %
  • Haze (ASTM D1003) 7.5 %
  • Melt Index (g/10min @190°C/21.6 kg) 2
  • Tensile Elongation at Break, MD 400 %
  • Tensile Elongation at Break, TD 550 %
  • Tensile Strength Break, MD (ASTM D882) in MPa (psi) 20.9 (3030)
  • Tensile Strength Break, TD (ASTM D882) in MPa (psi) 18.1 (2630)
  • Tensile Strength Yield, MD (ASTM D882) in MPa (psi) 10.3 (1490)
  • Tensile Strength Yield, TD (ASTM D882) in MPa (psi) 12.2 (1770)
  • Vicat Softening Point in °C(°F) 99°C (210°F)

この製品の有効な安全データシート(SDS)がありません
詳細については当社にお問い合わせください

選択された言語での当該製品の販売規格は見つかりません

DOW™ LDPE 450E Low Density Polyethylene Resin
この製品にはテクニカルデータシートはございません
詳細については当社にお問い合わせください

DOW™ LDPE 450E Low Density Polyethylene Resin


この製品に関する規制データシートはございません


DOW™ LDPE 450E Low Density Polyethylene Resin
この製品で利用可能な代理店オプションについて お問い合わせください