DOW™ DNDA-1796 NT 7 Medium Density Polyethylene Resin

This has high melt strength, excellent low temperature toughness, good environmental stress crack resistance, and excellent flex life.

物性

これらの値は一般特性を表すもので、規格ではありません。

2% Secant Modulus, MD (ASTM D882) in MPa (psi) はいいいえ 655 (95000) - Method 1 (3 point load)
Anti-block はいいいえ false
Brittleness Temperature in °C(°F) はいいいえ <-95.0°C (<-139°F) - Compression Molded
Density (ASTM D792) はいいいえ 0.939 g/cm3
ESCR-Environmental Stress Crack Resistance (100% IGEPAL) はいいいえ >2000hr - F0 - Compression Molded
Impact Strength in MPa (psi) はいいいえ 231 (110) - Type S
Melt Index (g/10min @190°C/2.16 kg) はいいいえ 0.6
Melt Index (g/10min @190°C/21.6 kg) はいいいえ 0.6
Slip はいいいえ false
Tensile Elongation at Break, MD はいいいえ >800 - Compression Molded %
Tensile Strength Break, MD (ASTM D882) in MPa (psi) はいいいえ 20.7 (3000) - Compression Molded
Tensile Strength Yield, MD (ASTM D882) in MPa (psi) はいいいえ 19.0 (2750) - Compression Molded
Vicat Softening Point in °C(°F) はいいいえ 120°C (248°F)