[{"values":[{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"JP","default":"ja-jp"},{"values":[{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"CN","default":"zh-cn"},{"values":[{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"US","default":"en-us"}]

AFFINITY™ PL 1888G Polyolefin Plastomer

This product is primarily used for high speed packaging applications requiring low seal initiation temperature and good machinability (low consistent coefficient of friction and low block force). This resin is designed to give a COF of < 0.2 for an ~1.0 mil sealant layer in a coextruded film and run fast and trouble-free on most extrusion equipment, including blown film dies equipped with narrow die gaps. - For use in monolayer films and as the sealant layer in multilayer films - For fresh-cut produce, meat, cheese, and other high speed packaging applications requiring good machinability - Fast processing on narrow die gaps

物性

これらの値は一般特性を表すもので、規格ではありません。

  • Anti-block はい いいえ true
  • Density はい いいえ 0.904 g/cm3
  • Elmendorf Tear Strength, MD (ASTM D1922) in grams (lbs) はい いいえ 430 g
  • Elmendorf Tear Strength, TD (ASTM D1922) in grams (lbs) はい いいえ 720 g
  • Haze (ASTM D1003) はい いいえ 3.4 %
  • Heat Seal Initiation Temp in °C(°F) はい いいえ 80°C (176°F)
  • Melt Index (g/10 minutes) はい いいえ 1
  • Melting Point, DSC (Dow Method) in °C(°F) はい いいえ 98°C (208°F)
  • Puncture Resistance (Dow Method) in joules/cm3 (lbs/in3) はい いいえ 15.6 (189 )
  • Slip はい いいえ true
  • Tensile Elongation at Break, MD はい いいえ 600 %
  • Tensile Elongation at Break, TD はい いいえ 570 %
  • Tensile Strength Break, MD (ASTM D882) in MPa (psi) はい いいえ 49.3 (7150)
  • Tensile Strength Break, TD (ASTM D882) in MPa (psi) はい いいえ 39.8 (5770)
  • Tensile Strength Yield, MD (ASTM D882) in MPa (psi) はい いいえ 5.92 (858)
  • Tensile Strength Yield, TD (ASTM D882) in MPa (psi) はい いいえ 5.98 (868)
  • Vicat Softening Point in °C(°F) はい いいえ 85 °C (185°F)

この製品の有効な安全データシート(SDS)がありません
詳細については当社にお問い合わせください

選択された言語での当該製品の販売規格は見つかりません

AFFINITY™ PL 1888G Polyolefin Plastomer
この製品にはテクニカルデータシートはございません
詳細については当社にお問い合わせください

AFFINITY™ PL 1888G Polyolefin Plastomer


この製品に関する規制データシートはございません


AFFINITY™ PL 1888G Polyolefin Plastomer
この製品で利用可能な代理店オプションについて お問い合わせください