[{"values":[{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"JP","default":"ja-jp"},{"values":[{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"CN","default":"zh-cn"},{"values":[{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"US","default":"en-us"}]

AFFINITY™ PL 1840G Polyolefin Plastomer

This product is produced via INSITE* Technology. It is an ethylene alpha-olefin resin designed to provide blown film with low temperature sealability, good puncture resistance, optics and organoleptic properties. It also has excellent compatibility with other polyolefins, allowing efficient blending and coextrusion. It has outstanding low temperature sealability and toughness, is suitable as a sealant in liquid & dry food pouch applications. Applications: Blown Film.

物性

これらの値は一般特性を表すもので、規格ではありません。

  • Anti-block はい いいえ false
  • Density はい いいえ 0.909 g/cm3
  • Elmendorf Tear Strength, MD (ASTM D1922) in grams (lbs) はい いいえ 560 g
  • Elmendorf Tear Strength, TD (ASTM D1922) in grams (lbs) はい いいえ 840 g
  • Haze (ASTM D1003) はい いいえ 2.5 %
  • Heat Seal Initiation Temp in °C(°F) はい いいえ 92.8°C (199°F)
  • Melt Index (g/10 minutes) はい いいえ 1
  • Melting Point, DSC (Dow Method) in °C(°F) はい いいえ 106°C (222°F)
  • Puncture Resistance (Dow Method) in joules/cm3 (lbs/in3) はい いいえ 25.2 (304 )
  • Slip はい いいえ false
  • Tensile Elongation at Break, MD はい いいえ 620 %
  • Tensile Elongation at Break, TD はい いいえ 580 %
  • Tensile Strength Break, MD (ASTM D882) in MPa (psi) はい いいえ 47.8 (6930)
  • Tensile Strength Break, TD (ASTM D882) in MPa (psi) はい いいえ 45.4 (6580)
  • Tensile Strength Yield, MD (ASTM D882) in MPa (psi) はい いいえ 8.76 (1270)
  • Tensile Strength Yield, TD (ASTM D882) in MPa (psi) はい いいえ 8.07 (1170)
  • Vicat Softening Point in °C(°F) はい いいえ 95°C (203°F)

この製品の有効な安全データシート(SDS)がありません
詳細については当社にお問い合わせください

選択された言語での当該製品の販売規格は見つかりません

AFFINITY™ PL 1840G Polyolefin Plastomer
この製品にはテクニカルデータシートはございません
詳細については当社にお問い合わせください

AFFINITY™ PL 1840G Polyolefin Plastomer


この製品に関する規制データシートはございません


AFFINITY™ PL 1840G Polyolefin Plastomer
この製品で利用可能な代理店オプションについて お問い合わせください