SYLGARD™ 170 Fast Cure Silicone Elastomer Kit
These values are typical properties and are not intended for use in preparing specifications.
- Color Yes No Black
- Dielectric Constant at 100 Hz Yes No 3.53
- Dielectric Constant at 100 kHz Yes No 3.45
- Dielectric Strength Yes No 350 volts per mil v/mil
- Dissipation Factor at 100 Hz Yes No 0.0038
- Dissipation Factor at 100 kHz Yes No < 0.0008
- Durometer - Shore A Yes No 41.45 Shore A
- Flowable Yes No true
- Number of Parts Yes No Two
- Resistance Type Yes No Thermal Resistance
- Temperature Stable Yes No High, Low
- Thermal Conductivity Yes No 0.4 Watts per meter K
- Thermosetting Yes No true
DOWSIL™ 3145 RTV Mil-A-46146 Adhesive / Sealant
One-part, moisture RTV, non-flow, high strength, UL and Mil Spec.
DOWSIL™ 3-1953 Conformal Coating
One-part, translucent, fast moisture RTV cure with mild heat acceleration possible, soft, stress-relieving, contains UV indicator.
SYLGARD™ 527 A&B Silicone Dielectric Gel
A two-part, 1 to 1 mix ratio dielectric gel that is suitable for sealing and protecting various electronic devices, especially those with delicate components.
DOWSIL™ TC-2035 Adhesive A/B Kit
Two-part heat cure silicone highly thermally conductive adhesive with low bond line thickness.
SILASTIC™ Q3-3636 Adhesive (Base & Catalyst)
Two-part, low fogging RTV adhesive for headlamps (plastic and metal bonding).
DOWSIL™ 7091 Adhesive Sealant
High performance, neutral cure silicone adhesive/sealant.
DOWSIL™ 1-4174 Thermally Conductive Adhesive
One-part, grey, heat cure, thermally conductive, low flow, same as 1-4173 with 7 mil (178 micron) spacer beads, self-priming.
DOWSIL™ 3-6265 Thixotropic Adhesive
One-part, black, heat cure, high strength, self-priming, contains UV indicator, non-flowing version of 3-6611. Suitable for use in automotive and industrial assembly areas including sealing lids and housings, attaching base plates gasket, and connector sealing.
DOWSIL™ EA-1236 Base & Catalyst
Two-part, fast room temperature cure adhesive. Sealing lids and housings, parts fixing on circuit board. Performs well under typical automotive test conditions.
DOWSIL™ 1200 OS Primer
An air drying primer supplied as a dilute solution of moisture reactive materials in volatile siloxane and is used to improve both the quality and speed of adhesion development to room temperature vulcanizing silicone sealants to a variety of common non-porous substrates.
No Safety Data Sheets are available online for this material Please Contact Dow for additional information.
No Safety Data Sheets are available online for this material
Please Contact Dow for additional information.
No sales specification could be found for this material in selected language