SILASTIC™ SH 861 US Silicone Rubber
A general-purpose silicone rubber product with a hardness of 60 degrees, especially suitable for mold forming. It can also be used for a wide range of applications such as keypad and gasket.
These values are typical properties and are not intended for use in preparing specifications.
- Color Off-White
- Density (g/cm3) 1.23 g/cm3
- Elongation Die 3 290 %
- JIS Type-A 61
- Shrinkage - Linear Disk 3.7 %
- Tear Strength Die-Angle 20 N/mm
- Tensile Strength Die 3 7.7 MPa
No Safety Data Sheets are available online for this material Please Contact Dow for additional information.
No Safety Data Sheets are available online for this material
Please Contact Dow for additional information.