SILASTIC™ SH 842 U Silicone Rubber
A general-purpose silicone rubber product with a hardness of 39 degrees and is particularly suitable for mold forming. It can also be used for a wide range of applications such as keypad and gasket.
These values are typical properties and are not intended for use in preparing specifications.
- Color Yes No Off-White
- Density (g/cm3) Yes No 1.13 g/cm3
- Elongation Die 3 Yes No 480 %
- JIS Type-A Yes No 40
- Shrinkage - Linear Disk Yes No 3.7 %
- Tear Strength Die-Angle Yes No 21 N/mm
- Tensile Strength Die 3 Yes No 8.1 MPa
No Safety Data Sheets are available online for this material Please Contact Dow for additional information.
No Safety Data Sheets are available online for this material
Please Contact Dow for additional information.