SILASTIC™ RTV-4234-T4 Base and Curing Agent
These values are typical properties and are not intended for use in preparing specifications.
- Approximate De-mold Time Yes No 12 hrs
- Color Yes No Translucent
- Cure Type Yes No Addition Cure
- Durometer - Shore A Yes No 40 Shore A
- Mixing Viscosity Yes No 35000 Centipoise
- Polyesters Yes No true
- Specific Gravity @ 25C Yes No 1.09
- Tear Strength Yes No 150 ppi
- Tensile Strength Yes No 970 psi
- Working Time Yes No 90 Minutes
Frequently Bought Together
XIAMETER™ PMX-200 Silicone Fluid 50 cSt
100% active, 50 cSt, polydimethylsiloxane polymer. INCI Name: Dimethicone
DOWSIL™ 1-2287 Intermediate (MV-CYC-4)
Cure retardant that can be used to slow down room temperature cure of all addition cure (platinum cure) mold making silicone rubbers.
DOWSIL™ 3-6559 Cure Accelerator
Cure Accelerator, to speed up room temperature cure of all addition-cure (platinum cure) mold making silicone rubbers. It can also be used as a surface treatment to prevent inhibition. Contains a silicone polymer and platinum catalyst.
DOWSIL™ HS II Thixotropic Additive
Clear liquid that can be used with DOWSIL™ HS II, HS III, HS IV and with Silastic 3498, E, P-1, S, S-2, T-2, T-4, and V SIlicone Rubbers to produce skin molds on vertical surfaces or from immovable objects.
DOWSIL™ Cleaner & Surface Prep
Non Ozone depleting, VOC exempt, Silicone cleaner to clean Plastic and Metals, excellent for removing oils, silicone-based car wax and protectants.
DOWSIL™ TC-4525 A/B
A thermally Conductive Gap Filler offers thermal conductivity of 2.5W/m.K. This is a soft and compressible silicone material designed to dissipate heat from electronic modules by conducting it to a heat sink such as an aluminum housing. Excellent fit for automotive electronics and battery packs applications.
SYL-OFF™ SL 200 Coating
Solventless coating that offers low, stable release force at variety of peel speeds.
XIAMETER™ PMX-200 Silicone Fluid 2 cSt
A polydimethylsiloxane polymer for use in skincare, suncare, hair care, and color cosmetic applications. INCI Name: Dimethicone
DOWSIL™ 790 Silicone Building Sealant
A one-part silicone formulation that cures in the presence of atmospheric moisture to produce a durable, fire-resistant, flexible and ultra-low-modulus silicone rubber building joint seal.
SYL-OFF™ 7678 Crosslinker
Solventless crosslinker recommended where optimum cure performance and bathlife are required. Suitable for use with Syl-Off® solventless and solvent based soatings.
DOWSIL™ 7091 Adhesive Sealant
High performance, neutral cure silicone adhesive/sealant.
DOWSIL™ 1200 OS Primer
An air drying primer supplied as a dilute solution of moisture reactive materials in volatile siloxane and is used to improve both the quality and speed of adhesion development to room temperature vulcanizing silicone sealants to a variety of common non-porous substrates.
SYLGARD™ 527 A&B Silicone Dielectric Gel
A two-part, 1 to 1 mix ratio dielectric gel that is suitable for sealing and protecting various electronic devices, especially those with delicate components.
DOWSIL™ VM-2270 Aerogel Fine Particles
A white free-flowing powder that is 100 percent hydrophobic for use in hair care, skincare, fragrance delivery, and antiperspirants / deodorants. INCI Name: Silica Silylate
DOWSIL™ Q1-9226 Thermally Conductive Adhesive
Typical applications include bonding organic and ceramic substrates to heat sinks for electronic control modules in automotive applications. It is a two-part, gray, 1:1 mix ratio, heat cure, moderate flow, self-priming, thermally conductive adhesive.
No Safety Data Sheets are available online for this material Please Contact Dow for additional information.
No Safety Data Sheets are available online for this material
Please Contact Dow for additional information.