SILASTIC™ RTV-4131-P1 Base and Curing Agent
These values are typical properties and are not intended for use in preparing specifications.
- Approximate De-mold Time 8 hrs
- Color Off-White
- Cure Type Addition Cure
- Durometer - Shore A 25 Shore A
- Elongation 850 %
- High Tear true
- Mixing Viscosity 13500 Centipoise
- Number of Parts Two
- Specific Gravity @ 25C 1.12
- Tear Strength 130 ppi
- Tensile Strength 1080 psi
- Working Time 45 Minutes
Frequently Bought Together
DOWSIL™ 3-6559 Cure Accelerator
Cure Accelerator, to speed up room temperature cure of all addition-cure (platinum cure) mold making silicone rubbers. It can also be used as a surface treatment to prevent inhibition. Contains a silicone polymer and platinum catalyst.
XIAMETER™ PMX-200 Silicone Fluid 50 cSt
100% active, 50 cSt, polydimethylsiloxane polymer. INCI Name: Dimethicone
DOWSIL™ HS II Thixotropic Additive
Clear liquid that can be used with DOWSIL™ HS II, HS III, HS IV and with Silastic 3498, E, P-1, S, S-2, T-2, T-4, and V SIlicone Rubbers to produce skin molds on vertical surfaces or from immovable objects.
DOWSIL™ 1-2287 Intermediate (MV-CYC-4)
Cure retardant that can be used to slow down room temperature cure of all addition cure (platinum cure) mold making silicone rubbers.
DOWSIL™ Cleaner & Surface Prep
Non Ozone depleting, VOC exempt, Silicone cleaner to clean Plastic and Metals, excellent for removing oils, silicone-based car wax and protectants.
No Safety Data Sheets are available online for this material Please Contact Dow for additional information.
No Safety Data Sheets are available online for this material
Please Contact Dow for additional information.