SILASTIC™ RBL-9694-30P A&B Liquid Silicone Rubber
You may also be interested in the following products:
DOWSIL™ 92-023 Primer
Adhesion enhancing, clear primer dispersed in heptane.
SYLGARD™ 527 A&B Silicone Dielectric Gel
A two-part, 1 to 1 mix ratio dielectric gel that is suitable for sealing and protecting various electronic devices, especially those with delicate components.
DOWSIL™ 121 Structural Glazing Sealant
A fast-curing structural silicone sealant for use in structural and weatherseal applications.
DOWSIL™ 1-4174 Thermally Conductive Adhesive
One-part, grey, heat cure, thermally conductive, low flow, same as 1-4173 with 7 mil (178 micron) spacer beads, self-priming.
DOWSIL™ 7091 Adhesive Sealant
High performance, neutral cure silicone adhesive/sealant.
DOWSIL™ Q1-9226 Thermally Conductive Adhesive
Typical applications include bonding organic and ceramic substrates to heat sinks for electronic control modules in automotive applications. It is a two-part, gray, 1:1 mix ratio, heat cure, moderate flow, self-priming, thermally conductive adhesive.
DOWSIL™ 3-6265 Thixotropic Adhesive
One-part, black, heat cure, high strength, self-priming, contains UV indicator, non-flowing version of 3-6611. Suitable for use in automotive and industrial assembly areas including sealing lids and housings, attaching base plates gasket, and connector sealing.
DOWSIL™ TC-2035 Adhesive A/B Kit
Two-part heat cure silicone highly thermally conductive adhesive with low bond line thickness.
DOWSIL™ 1200 OS Primer
An air drying primer supplied as a dilute solution of moisture reactive materials in volatile siloxane and is used to improve both the quality and speed of adhesion development to room temperature vulcanizing silicone sealants to a variety of common non-porous substrates.
DOWSIL™ 3-1953 Conformal Coating
One-part, translucent, fast moisture RTV cure with mild heat acceleration possible, soft, stress-relieving, contains UV indicator.
SILASTIC™ Q3-3636 Adhesive (Base & Catalyst)
Two-part, low fogging RTV adhesive for headlamps (plastic and metal bonding).
SILASTIC™ RBL-9694-20P A&B Liquid Silicone Rubber
Two-part, 1:1 ratio, addition cure silicone elastomer for automated assembly of integrated compression seals.
SILASTIC™ RBL-9694-45M A&B Liquid Silicone Rubber
Two-part, 1:1 ratio, addition cure silicone elastomer for automated dispensing of integrated compression seals.
No Safety Data Sheets are available online for this material Please Contact Dow for additional information.
No Safety Data Sheets are available online for this material
Please Contact Dow for additional information.