MAINCOTE™ AE-610 Emulsion
Innovative water borne acrylic polymer emulsion designed for use in 2K epoxy linking coatings for coatings over concrete surfaces to provide good chemical resistance and excellent UV durability when cross linked with epoxy linking coatings. Applications: When combined with waterborne liquid epoxy dispersion in either an 80/20 or 90/10 ratio (by weight – commercial form), the optimum combination of good sanding ability with sufficient flexibility can be achieved to formulate 2K WB metal and concrete coatings Features: • Exceptional adhesion to a variety of substrates • Low VOC formulations < 100g/L, low odor compared to 2kWB epoxy • Good wet-on-wet performance • Excellent corrosion resistance properties • Good flexibility
Uses:
- Low VOC industrial maintenance and DIY primers and topcoats
- High Performance Metal Protection Applications
Benefits:
- Excellent cost/performance balance
- Excellent corrosion resistance
- High gloss potential and excellent durability
- High performance, single resin that can be used in many different applications, including direct-to-metal coatings
- Lowest VOC formulations at 100g/L or less APEO-free
- Ambient self-crosslinking
- APEO-free
- Quick hardness development
- Exceptional adhesion to a variety of substrates
- EN-12944
- C3
- High corrosion resistance (DTM)
- Low VOC formulations capable
- High gloss potential and excellent durability and dirk pick up resistance properties APEO is not intentionally added and is not knowingly introduced from another raw material
Properties
These values are typical properties and are not intended for use in preparing specifications.
- % Solids Yes No 41.5 %
- % Solids Range Yes No 41.0-42.0 %
No Safety Data Sheets are available online for this material Please Contact Dow for additional information.
No Safety Data Sheets are available online for this material
Please Contact Dow for additional information.
