[{"values":[{"value":"Português-Portuguese","languageCode":"pt-br","link":"javascript:void(0);"},{"value":"日本語-Japanese","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-Chinese Simplified","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English","languageCode":"en-us","link":"javascript:void(0);"}],"label":"BR","default":"pt-br"},{"values":[{"value":"Português-Portuguese","languageCode":"pt-br","link":"javascript:void(0);"},{"value":"日本語-Japanese","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-Chinese Simplified","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English","languageCode":"en-us","link":"javascript:void(0);"}],"label":"JP","default":"ja-jp"},{"values":[{"value":"Português-Portuguese","languageCode":"pt-br","link":"javascript:void(0);"},{"value":"日本語-Japanese","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-Chinese Simplified","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English","languageCode":"en-us","link":"javascript:void(0);"}],"label":"CN","default":"zh-cn"},{"values":[{"value":"Português-Portuguese","languageCode":"pt-br","link":"javascript:void(0);"},{"value":"日本語-Japanese","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-Chinese Simplified","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English","languageCode":"en-us","link":"javascript:void(0);"}],"label":"US","default":"en-us"}]

DOWSIL™ SE 9188 RTV

A one-part, gray, non-flowing adhesive, fast tack-free with controlled volatility and good flame resistance.

Properties

These values are typical properties and are not intended for use in preparing specifications.

  • Adhesion to Yes No Metal, Plastic, Ceramic
  • Color Yes No Gray
  • Dielectric Constant at 100 Hz Yes No 3.4
  • Dielectric Strength Yes No 750 volts per mil v/mil
  • Dissipation Factor at 100 Hz Yes No 0.0003
  • Durometer - Shore A Yes No 34 Shore A
  • Elongation Yes No 400 %
  • Low Volatility Yes No true
  • Nonflowable Yes No true
  • Number of Parts Yes No One
  • Primerless Adhesion Yes No Primerless
  • Room Temperature Cure - Hours Yes No 24 to 72 Hours
  • Shear Yes No 270 psi
  • Specific Gravity @ 25C Yes No 1.29
  • Tack-Free Time-50% RH Yes No 10 Minutes
  • Temperature Range Yes No -45 to 200 °C
  • Temperature Stable Yes No High
  • Tensile Strength Yes No 420 psi
  • Volume Resistivity Yes No 1e+015 ohm-centimeters
  • DOWSIL™ FA 4002 ID Silicone Acrylate
    A blend of ~40% acrylates / polytrimethylsiloxymethacrylate copolymer in isodecane. INCI Name: Isododecane (and) Acrylates / Polytrimethylsiloxymethacrylate Copolymer

  • DOWSIL™ HMW 2220 Non-Ionic Emulsion
    A 61 percent nonionic emulsion of a high molecular weight divinyldimethicone / dimethicone copolymer for use in skincare, suncare, shower gel, color cosmetic, and hair care applications. INCI Name: Divinyldimethicone / Dimethicone Copolymer (and) C12-13 Pareth-23 (and) C12-13 Pareth-3

  • DOWSIL™ 3145 RTV Mil-A-46146 Adhesive / Sealant

    One-part, moisture RTV, non-flow, high strength, UL and Mil Spec.


  • SYLGARD™ 527 A&B Silicone Dielectric Gel

    A two-part, 1 to 1 mix ratio dielectric gel that is suitable for sealing and protecting various electronic devices, especially those with delicate components.


  • SYLGARD™ 184 Silicone Elastomer Kit

    Two-part, clear, 10:1, RT and heat cure, good strength, UL and Mil Spec, same as SYLGARD™ 182 but with faster RT cure.


  • DOWSIL™ 7091 Adhesive Sealant
    High performance, neutral cure silicone adhesive/sealant.

  • DOWSIL™ SE 9187 L Adhesive

    One-part, black, clear or white, fast tack-free, controlled volatility adhesive with very low viscosity suitable for display module assembly, PCB protection (conformal coating) and general potting.


  • DOWSIL™ TC-4525 A/B

    A thermally Conductive Gap Filler offers thermal conductivity of 2.5W/m.K. This is a soft and compressible silicone material designed to dissipate heat from electronic modules by conducting it to a heat sink such as an aluminum housing. Excellent fit for automotive electronics and battery packs applications.


  • DOWSIL™ EP-9610 Cosmetic Powder
    A soft powder that provides unique smooth, bouncy and silky feel with optical effect and sebum control with easy processing for Color Cosmetics and Skin Care products.  INCI Name: Dimethicone Crosspolymer

  • DOWSIL™ 1200 OS Primer
    An air drying primer supplied as a dilute solution of moisture reactive materials in volatile siloxane and is used to improve both the quality and speed of adhesion development to room temperature vulcanizing silicone sealants to a variety of common non-porous substrates.

No Safety Data Sheets are available online for this material
Please Contact Dow for additional information.

No sales specification could be found for this material in selected language

DOWSIL™ SE 9188 RTV
No Technical Data Sheets are available online for this material.
Please Contact Dow for additional information.

Choose

DOWSIL™ SE 9188 RTV


No Regulatory Data Sheets are available online for this product.


DOWSIL™ SE 9188 RTV
Please Contact Dow for distribution options available for this product.