DOWSIL™ HS II Thixotropic Additive
Clear liquid that can be used with DOWSIL™ HS II, HS III, HS IV and with Silastic 3498, E, P-1, S, S-2, T-2, T-4, and V SIlicone Rubbers to produce skin molds on vertical surfaces or from immovable objects.
These values are typical properties and are not intended for use in preparing specifications.
- Suggested Use Level - % Yes No 0.01 to 2.5 %
- Thixotropic Yes No true
You may also be interested in the following products:
SILASTIC™ RTV-4260-V Base and Curing Agent
High strength silicone rubber featuring medium durometer, low mixed viscosity, suited for the reproduction of architectural, furniture components and prototypes. Recommended for use with rigid and foam polyurethane and can be used with polyester, cement and plaster.
SILASTIC™ RTV-4251-S2 Base and Curing Agent
High strength, lower durometer silicone rubber suited for many moldmaking applications. Recommended for use with plaster, cement and rigid polyurethane and can be used with polyesters.
SILASTIC™ RTV-4250-S Base and Curing Agent
High strength silicone rubber suited for prototyping, production tooling, artistic and renovation applications. Recommended for use with polyesters, cement and rigid polyurethanes also can be used with plaster.
SILASTIC™ RTV-4234-T4 Base and Curing Agent
Translucent, high tear strength mold making rubber featuring fast cure. Suited for prototype design and production tooling.
SILASTIC™ RTV-4131-P1 Base and Curing Agent
2 part, high strength silicone rubber suited for the production of print pads.
SILASTIC™ RTV-4230-E Base and Curing Agent
High strength silicone mold making rubber recommended for use with polyester or plaster and can be used with rigid and foam polyurethanes and epoxies.
No Safety Data Sheets are available online for this material Please Contact Dow for additional information.
No Safety Data Sheets are available online for this material
Please Contact Dow for additional information.