[{"values":[{"value":"日本語-Japanese","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-Chinese Simplified","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English","languageCode":"en-us","link":"javascript:void(0);"}],"label":"JP","default":"ja-jp"},{"values":[{"value":"日本語-Japanese","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-Chinese Simplified","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English","languageCode":"en-us","link":"javascript:void(0);"}],"label":"CN","default":"zh-cn"},{"values":[{"value":"日本語-Japanese","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-Chinese Simplified","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English","languageCode":"en-us","link":"javascript:void(0);"}],"label":"US","default":"en-us"}]

DOWSIL™ EA-6060 Adhesive A&B

 A two-part, non-flowing silicone adhesive enabling assembly production savings due to a fast cure at moderate temperature. 

Benefits:

  • Two-Part, Low Temperature Cure:Enables assembly production savings due to a fast cure at a moderate temperature (80°C).
  • Better Transmission: Retains original physical and electrical properties over a broad range of operating conditions, with a scavenger to reduce voids.
  • Longer Open Time: More efficient processability; greater manufacturing flexibility and reduced waste.
  • UV Dyed: Enables easier inspections.

Properties

These values are typical properties and are not intended for use in preparing specifications.

  • Elongation Yes No 290 %
  • Specific Gravity Yes No 1.3/1.2
  • Tensile Strength Yes No 449.617 psi
  • Viscosity - Part A Yes No 190 Pa.s
  • Viscosity - Part B Yes No 90 Pa.s
  • Working Time in hrs at 25 Deg C Yes No 1

Enabling automotive assembly production savings due to better transmission and a longer open time

Automotive manufacturers are always looking for new ways to improve product performance, increase production efficiencies, and lessen product wastage. To fulfill these demands, we are driven to continually innovate our industry-leading portfolio of advanced assembly solutions.

Introducing DOWSIL™ EA-6060 Adhesive, a two-part, non-flowing silicone adhesive, designed for a fast cure and adhesion at a lower temperature, while still maintaining the robust and proven performance of hydrosilylation cure systems. It fits a variety of electronics control units or sensor modules applications in automobiles where lid seal, base plate attaching, gasketing, or connector sealing is required and reliable adhesion is necessary.

  • DOWSIL™ 795 Silicone Building Sealant
    A one-part, cold-applied, non-sagging silicone material that cures to a medium modulus silicone rubber upon exposure to atmospheric moisture.

  • DOWSIL™ 7091 Adhesive Sealant
    High performance, neutral cure silicone adhesive/sealant.

  • SYL-OFF™ 4000 Catalyst
    General purpose catalyst which is compatible with all Syl-off® brand solvent based and solventless release coating systems as well as Plantinum cure silicone PSAs.

  • DOWSIL™ 995 Silicone Structural Sealant
    A one-component, self-priming, shelf-stable, neutral-cure, elastomeric adhesive specifically formulated for silicone structural glazing and exhibits excellent unprimed adhesion to most building substrates. This product has superior unprimed adhesion for structural glazing applications for hurricane or impact rated windows and doors. It has a movement capability of +/- 50%.

  • DOWSIL™ 790 Silicone Building Sealant
    A one-part silicone formulation that cures in the presence of atmospheric moisture to produce a durable, fire-resistant, flexible and ultra-low-modulus silicone rubber building joint seal.

  • DOWSIL™ 983 Structural Glazing Sealant Base and Curing Agent

    Designed for specialized use where dual structural and weatherseal applications are desired for factory glazing and curtainwall production. Once cured, this structural sealant forms a durable, flexible, watertight bond that can be warranted for 20 years and used in ±25% movement weatherseal applications. It has excellent unprimed adhesion to glass, alodine, and anodized aluminum1, although DOWSIL™ Primer-C OS is recommended for fast and consistent adhesion, especially to high-performance substrates approved for architectural structural glazing applications.


  • DOWSIL™ 756 SMS Building Sealant
    A medium-modulus elastomeric sealant designed for weatherproofing sensitive porous stone and metal panel substrates to reduce residue rundown and substrate staining in new and remedial construction.

  • DOWSIL™ Q1-9226 Thermally Conductive Adhesive
    Typical applications include bonding organic and ceramic substrates to heat sinks for electronic control modules in automotive applications. It is a two-part, gray, 1:1 mix ratio, heat cure, moderate flow, self-priming, thermally conductive adhesive.

  • XIAMETER™ PMX-200 Silicone Fluid 350 cSt
    100% active, 350 cSt, polydimethylsiloxane polymer. INCI Name: Dimethicone

  • DOWSIL™ 791 Weatherproofing Sealant
    A one-part, medium-modulus, elastomeric sealant designed for general weathersealing. It is a silicone formulation that cures to a flexible and curable silicone rubber building joint seal.

No Safety Data Sheets are available online for this material
Please Contact Dow for additional information.

No sales specification could be found for this material in selected language

DOWSIL™ EA-6060 Adhesive A&B
No Technical Data Sheets are available for this product
Please Contact Dow for additional information.

Choose
Choose

DOWSIL™ EA-6060 Adhesive A&B


No Regulatory Data Sheets are available for this product


DOWSIL™ EA-6060 Adhesive A&B
Please Contact Dow for distribution options available for this product.