DOWSIL™ 7920-LV Die Attach Adhesive
These values are typical properties and are not intended for use in preparing specifications.
- Color Yes No Black
- Dielectric Constant at 100 Hz Yes No 2.82
- Dielectric Constant at 100 kHz Yes No 2.81
- Dielectric Strength Yes No 475 volts per mil v/mil
- Dissipation Factor at 100 Hz Yes No 0.0011
- Dissipation Factor at 100 kHz Yes No < 0.0002
- Heat Cure Yes No 30 Minutes @ 150 Deg C
- Number of Parts Yes No One
- Shelf Life Yes No 360 Days
- Specific Gravity Yes No 1.2
- Thixotropic Yes No true
- Thixotropic Index Yes No 2.8
- Unprimed Adhesion - Lap Shear (Al) Yes No 960 psi
- Volume Resistivity Yes No 2.1e+015 ohm-centimeters
Frequently Bought Together
DOWSIL™ 1200 OS Primer
An air drying primer supplied as a dilute solution of moisture reactive materials in volatile siloxane and is used to improve both the quality and speed of adhesion development to room temperature vulcanizing silicone sealants to a variety of common non-porous substrates.
SYLGARD™ 527 A&B Silicone Dielectric Gel
A two-part, 1 to 1 mix ratio dielectric gel that is suitable for sealing and protecting various electronic devices, especially those with delicate components.
XIAMETER™ PMX-200 Silicone Fluid 60,000 cSt
100% active, 60,000 cSt, polydimethylsiloxane polymer. INCI Name: Dimethicone
DOWSIL™ Q1-9226 Thermally Conductive Adhesive
Typical applications include bonding organic and ceramic substrates to heat sinks for electronic control modules in automotive applications. It is a two-part, gray, 1:1 mix ratio, heat cure, moderate flow, self-priming, thermally conductive adhesive.
DOWSIL™ 9040 Silicone Elastomer Blend
A mixture of high molecular weight silicone elastomers (dimethicone crosspolymer) in cyclopentasiloxane for use in skincare, haircare, color cosmetics, suncare, antiperspirants and deodorants, and woundcare applications. INCI Name: Cyclopentasiloxane (and) Dimethicone Crosspolymer
SYLGARD™ 184 Silicone Elastomer Kit
Two-part, clear, 10:1, RT and heat cure, good strength, UL and Mil Spec, same as SYLGARD™ 182 but with faster RT cure.
DOWSIL™ 7091 Adhesive Sealant
High performance, neutral cure silicone adhesive/sealant.
VORASURF™ DC 198 Additive
Silicone surfactant for production of flexible slabstock foam.
DOWSIL™ TC-4525 A/B
A thermally Conductive Gap Filler offers thermal conductivity of 2.5W/m.K. This is a soft and compressible silicone material designed to dissipate heat from electronic modules by conducting it to a heat sink such as an aluminum housing. Excellent fit for automotive electronics and battery packs applications.
DOWSIL™ TC-2035 Adhesive A/B Kit
Two-part heat cure silicone highly thermally conductive adhesive with low bond line thickness.
No Safety Data Sheets are available online for this material Please Contact Dow for additional information.
No Safety Data Sheets are available online for this material
Please Contact Dow for additional information.