DOWSIL™ 340 Heat Sink Compound
These values are typical properties and are not intended for use in preparing specifications.
- Color Yes No White
- Nonflowable Yes No true
- Number of Parts Yes No One
- Resistance Type Yes No Ozone Resistance, Thermal Resistance
- Shelf Life Yes No 1800 Days
- Specific Gravity @ 25C Yes No 2.1
- Temperature Stable Yes No High, Low
- Thermal Conductivity Yes No 0.67 Watts per meter K
- Thickening System Yes No Metal Oxide
- Viscosity Yes No 542000 mPa.s
- Worked Penetration Yes No 290 mm/10
You may also be interested in the following products:
DOWSIL™ 3145 RTV Mil-A-46146 Adhesive / Sealant
One-part, moisture RTV, non-flow, high strength, UL and Mil Spec.
DOWSIL™ 1-4173 Thermally Conductive Adhesive
One-part gray, flowable thermally conductive adhesive with high tensile strength.
DOWSIL™ 3-6265 Thixotropic Adhesive
One-part, black, heat cure, high strength, self-priming, contains UV indicator, non-flowing version of 3-6611. Suitable for use in automotive and industrial assembly areas including sealing lids and housings, attaching base plates gasket, and connector sealing.
DOWSIL™ 1200 OS Primer
An air drying primer supplied as a dilute solution of moisture reactive materials in volatile siloxane and is used to improve both the quality and speed of adhesion development to room temperature vulcanizing silicone sealants to a variety of common non-porous substrates.
DOWSIL™ 7091 Adhesive Sealant
High performance, neutral cure silicone adhesive/sealant.
DOWSIL™ 3-1953 Conformal Coating
One-part, translucent, fast moisture RTV cure with mild heat acceleration possible, soft, stress-relieving, contains UV indicator.
SYLGARD™ 527 A&B Silicone Dielectric Gel
A two-part, 1 to 1 mix ratio dielectric gel that is suitable for sealing and protecting various electronic devices, especially those with delicate components.
VORASURF™ DC 198 Additive
High-efficiency silicone surfactant used for a wide variety of flexible slabstock foam formulations.
DOWSIL™ 1-4174 Thermally Conductive Adhesive
One-part, grey, heat cure, thermally conductive, low flow, same as 1-4173 with 7 mil (178 micron) spacer beads, self-priming.
SILASTIC™ Q3-3636 Adhesive (Base & Catalyst)
Two-part, low fogging RTV adhesive for headlamps (plastic and metal bonding).
No Safety Data Sheets are available online for this material Please Contact Dow for additional information.
No Safety Data Sheets are available online for this material
Please Contact Dow for additional information.