DOWSIL™ 3-1598 HP Adhesive
One-part, black, flowable adhesive with high tensile strength.
These values are typical properties and are not intended for use in preparing specifications.
- Adhesion to Yes No Aluminum
- Color Yes No Black
- Dielectric Constant at 100 Hz Yes No 3.9
- Dielectric Constant at 100 kHz Yes No 3.03
- Dissipation Factor at 100 Hz Yes No 0.006
- Dissipation Factor at 100 kHz Yes No < 0.0003
- Durometer - Shore A Yes No 57 Shore A
- Dynamic Viscosity Yes No 82000 Centipoise
- Elongation Yes No 260 %
- Flowable Yes No true
- Heat Cure Yes No 180 Minutes @ 100 Deg C, 30 Minutes @ 125 Deg C, 15 Minutes @ 150 Deg C
- Number of Parts Yes No One
- Self Leveling Yes No true
- Shear Yes No 712 psi
- Solventless Yes No true
- Temperature Range Yes No -45 to 200 °C
- Tensile Strength Yes No 780 psi
You may also be interested in the following products:
DOWSIL™ TC-2035 Adhesive A/B Kit
Two-part heat cure silicone highly thermally conductive adhesive with low bond line thickness.
DOWSIL™ 866 Primerless Silicone Adhesive
One-part, grey, flowable ashesive with high tensile strength.
DOWSIL™ 1200 OS Primer
An air drying primer supplied as a dilute solution of moisture reactive materials in volatile siloxane and is used to improve both the quality and speed of adhesion development to room temperature vulcanizing silicone sealants to a variety of common non-porous substrates.
DOWSIL™ X3-1598 Adhesive
One-part, black, heat cure, moderate flow, high strength, self-priming, similar to Q3-6611 with UV indicator.
DOWSIL™ 1-4174 Thermally Conductive Adhesive
One-part, grey, heat cure, thermally conductive, low flow, same as 1-4173 with 7 mil (178 micron) spacer beads, self-priming.
DOWSIL™ OS- 20
An ozone-safe volatile methylsiloxane (VMS) fluid developed specifically for use as a precision cleaning agent and carrier.
DOWSIL™ 7091 Adhesive Sealant
High performance, neutral cure silicone adhesive/sealant.
DOWSIL™ 1-4173 Thermally Conductive Adhesive
One-part gray, flowable thermally conductive adhesive with high tensile strength.
DOWSIL™ 3-6265 Thixotropic Adhesive
One-part, black, heat cure, high strength, self-priming, contains UV indicator, non-flowing version of 3-6611. Suitable for use in automotive and industrial assembly areas including sealing lids and housings, attaching base plates gasket, and connector sealing.
DOWSIL™ 3-1953 Conformal Coating
One-part, translucent, fast moisture RTV cure with mild heat acceleration possible, soft, stress-relieving, contains UV indicator.
No Safety Data Sheets are available online for this material Please Contact Dow for additional information.
No Safety Data Sheets are available online for this material
Please Contact Dow for additional information.