DOWSIL™ 3-1965 Conformal Coating
These values are typical properties and are not intended for use in preparing specifications.
- Color Yes No Transparent
- Dielectric Strength Yes No 425 volts per mil v/mil
- Dielectric Strength (kV/mm) Yes No 17 kV/mm
- Dissipation Factor at 100 Hz Yes No 0.001
- Dissipation Factor at 100 kHz Yes No < 0.0002
- Durometer - Shore A Yes No 33 Shore A
- Shelf Life Yes No 360 Days
- Solventless Yes No true
- Specific Gravity Yes No 0.99
- Temperature Range Yes No -45 to 200 °C
- Temperature Stable Yes No High, Low
- Viscosity Yes No 115 mPa.s
- Volume Resistivity Yes No 8.7e+014 ohm-centimeters
Frequently Bought Together
DOWSIL™ 1200 OS Primer
An air drying primer supplied as a dilute solution of moisture reactive materials in volatile siloxane and is used to improve both the quality and speed of adhesion development to room temperature vulcanizing silicone sealants to a variety of common non-porous substrates.
DOWSIL™ 790 Silicone Building Sealant
A one-part silicone formulation that cures in the presence of atmospheric moisture to produce a durable, fire-resistant, flexible and ultra-low-modulus silicone rubber building joint seal.
DOWSIL™ VM-2270 Aerogel Fine Particles
A white free-flowing powder that is 100 percent hydrophobic for use in hair care, skincare, fragrance delivery, and antiperspirants / deodorants. INCI Name: Silica Silylate
XIAMETER™ PMX-200 Silicone Fluid 2 cSt
A polydimethylsiloxane polymer for use in skincare, suncare, hair care, and color cosmetic applications. INCI Name: Dimethicone
DOWSIL™ 3-1953 Conformal Coating
One-part, translucent, fast moisture RTV cure with mild heat acceleration possible, soft, stress-relieving, contains UV indicator.
DOWSIL™ TC-2035 Adhesive A/B Kit
Two-part heat cure silicone highly thermally conductive adhesive with low bond line thickness.
DOWSIL™ TC-4525 A/B
A thermally Conductive Gap Filler offers thermal conductivity of 2.5W/m.K. This is a soft and compressible silicone material designed to dissipate heat from electronic modules by conducting it to a heat sink such as an aluminum housing. Excellent fit for automotive electronics and battery packs applications.
DOWSIL™ 7091 Adhesive Sealant
High performance, neutral cure silicone adhesive/sealant.
DOWSIL™ Q1-9226 Thermally Conductive Adhesive
Typical applications include bonding organic and ceramic substrates to heat sinks for electronic control modules in automotive applications. It is a two-part, gray, 1:1 mix ratio, heat cure, moderate flow, self-priming, thermally conductive adhesive.
SYLGARD™ 527 A&B Silicone Dielectric Gel
A two-part, 1 to 1 mix ratio dielectric gel that is suitable for sealing and protecting various electronic devices, especially those with delicate components.
No Safety Data Sheets are available online for this material Please Contact Dow for additional information.
No Safety Data Sheets are available online for this material
Please Contact Dow for additional information.