DOW™ LDPE 525E Low Density Polyethylene Resin
DOW LDPE 525E Low Density Polyethylene Resin can be readily extruded using conventional blown film techniques utilizing melt temperatures between 160 and 195 °C. This resin, when properly fabricated, shows excellent mechanical properties, consistent with its higher density (high stiffness) when compared to standard resins, whilst maintaining very high clarity and gloss. It shows good draw down properties and processability. This product does not contain slip nor antiblock additives. The purchaser remains responsible for whether the use complies with all relevant regulations. Applications: - High clarity lamination films. - Label Films - Packaging of soft products such as hand tissues, toilet tissues, feminine hygiene products. - High clarity tissues overwrap film. - Produce bags. - Food packaging films.
These values are typical properties and are not intended for use in preparing specifications.
- Density (ASTM D792) Yes No 0.93 g/cm3
- Elmendorf Tear Strength, MD (ASTM D1922) in grams (lbs) Yes No 240 g
- Elmendorf Tear Strength, TD (ASTM D1922) in grams (lbs) Yes No 180 g
- Melt Index (g/10min @190°C/21.6 kg) Yes No 3.2
No Safety Data Sheets are available online for this material Please Contact Dow for additional information.
No Safety Data Sheets are available online for this material
Please Contact Dow for additional information.