[{"values":[{"value":"日本語-Japanese","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-Chinese Simplified","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English","languageCode":"en-us","link":"javascript:void(0);"}],"label":"JP","default":"ja-jp"},{"values":[{"value":"日本語-Japanese","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-Chinese Simplified","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English","languageCode":"en-us","link":"javascript:void(0);"}],"label":"CN","default":"zh-cn"},{"values":[{"value":"日本語-Japanese","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-Chinese Simplified","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English","languageCode":"en-us","link":"javascript:void(0);"}],"label":"US","default":"en-us"}]

AFFINITY™ PL 1888G Polyolefin Plastomer

This product is primarily used for high speed packaging applications requiring low seal initiation temperature and good machinability (low consistent coefficient of friction and low block force). This resin is designed to give a COF of < 0.2 for an ~1.0 mil sealant layer in a coextruded film and run fast and trouble-free on most extrusion equipment, including blown film dies equipped with narrow die gaps. - For use in monolayer films and as the sealant layer in multilayer films - For fresh-cut produce, meat, cheese, and other high speed packaging applications requiring good machinability - Fast processing on narrow die gaps

Properties

These values are typical properties and are not intended for use in preparing specifications.

  • Anti-block true
  • Density 0.904 g/cm3
  • Elmendorf Tear Strength, MD (ASTM D1922) in grams (lbs) 430 g
  • Elmendorf Tear Strength, TD (ASTM D1922) in grams (lbs) 720 g
  • Haze (ASTM D1003) 3.4 %
  • Heat Seal Initiation Temp in °C(°F) 80°C (176°F)
  • Melt Index (g/10 minutes) 1
  • Melting Point, DSC (Dow Method) in °C(°F) 98°C (208°F)
  • Puncture Resistance (Dow Method) in joules/cm3 (lbs/in3) 15.6 (189 )
  • Slip true
  • Tensile Elongation at Break, MD 600 %
  • Tensile Elongation at Break, TD 570 %
  • Tensile Strength Break, MD (ASTM D882) in MPa (psi) 49.3 (7150)
  • Tensile Strength Break, TD (ASTM D882) in MPa (psi) 39.8 (5770)
  • Tensile Strength Yield, MD (ASTM D882) in MPa (psi) 5.92 (858)
  • Tensile Strength Yield, TD (ASTM D882) in MPa (psi) 5.98 (868)
  • Vicat Softening Point in °C(°F) 85 °C (185°F)

No Safety Data Sheets are available online for this material
Please Contact Dow for additional information.

No sales specification could be found for this material in selected language

AFFINITY™ PL 1888G Polyolefin Plastomer
No Technical Data Sheets are available for this product
Please Contact Dow for additional information.

AFFINITY™ PL 1888G Polyolefin Plastomer


No Regulatory Data Sheets are available for this product


AFFINITY™ PL 1888G Polyolefin Plastomer
Please Contact Dow for distribution options available for this product.