Dow Norkool and Ambitrol

Selecting the Right Product for the Application

Line Heaters and Indirect Line Heaters

Line heaters present a rather unique chemical challenge for corrosion protection. With no means of circulation other than from convection (fluid movement due to heat), corrosion protection can be difficult. The reduced circulation does not allow most heat transfer fluids to adequately protect metal surfaces. Furthermore, cleaning and replacing the coolant in a line heater is difficult because they are often located in remote areas and can be physically hard to get to. Choosing the best heat transfer fluid for maximum longevity is key. Norkool™ SLH is specifically designed to protect metal surfaces in the system at low circulation rates. The inhibitors in Norkool™ SLH react with the carbon steel surface of the line heater, forming a strong barrier to reduce corrosion.

Boilers

Often compressor stations will use an on-site boiler as a heat source for the location to heat buildings and hot water systems. When properly maintained, Ambitrol™ will protect the boiler system from corrosion while maintaining temperatures for as long as fifteen or twenty years without replacement.

Other applications:

For other applications requiring glycol-based coolants, please contact your Dow Representative for assistance in selecting the proper coolant. Those applications include:

  • Crude oil heaters
  • LNG vaporizers
  • Natural gas well head heaters
  • High speed stationary engines in chemical plants
  • Air compressors

About our products: All Dow heat transfer fluids or coolants, are made using only new virgin glycols, made in our facilities, and are 99.99% pure. Recycled glycols are never used.

About our products

Formulated Coolant solutions with patented anti-scaling technology combined with reliable additives help provide non-purified water tolerance that extend the service life of a system. Propylene glycol (PG) based NORKOOL™ coolants that are more environmentally friendly are also available. All Dow heat transfer fluids or coolants, are made using only new virgin glycols, made in our facilities, and are 99.99% pure. Recycled glycols are never used.

Contact a Dow Customer Service Representative

Contact Us