UCAR Latex 443

Starting Point Formulation

UCAR Latex 443

White Lacquer Formulation Suggestion LP-3846
Ingredients	Pounds	Gallons
Pigment Grind
UCAR™ Vehicle 443	149.9	17.2
Dispersant⁽¹⁾	5.9	0.7
Surfactant⁽²⁾	2.1	0.3
TERGITOL Surfactant NP-10	2.1	0.2
Antifoam⁽³⁾	0.9	0.1
Titanium Dioxide⁽⁴⁾	187.4	5.5
Pebble Mill Overnight
Letdown
UCAR Vehicle 443	421.3	48.2
Antifoam⁽³⁾	0.9	0.1
PROPOSAL Solvent B	40.9	5.6
Tributoxyethyl Phosphate	20.4	2.4
Mar-Resistant Aid⁽⁵⁾	0.9	0.1
Ammonium Benzoate, 10% Aqueous Solution	10.0	1.1
Deionized Water	150.8	18.1

Total:	993.5	99.6
Suppliers: ⁽¹⁾ Disperbyk (Byk-Mallinckrodt) or equivalent ⁽²⁾ Surfynol 104 (Air Products) or equivalent ⁽³⁾ Hodag PX-218 (Hodag) or equivalent ⁽⁴⁾ Zopaque RCL-9 (SCM) or equivalent ⁽⁵⁾ Byk 301(Byk-Mallinckrodt) or equivalent

Lacquer Properties

Pigment/Binder Ratio

0.8/1

Solids, %
	by Weight
	by Volume

42.4

8.6

Viscosity, No. 4 Ford Cup, sec
	Initial
	After 10 days at 140°F

20
20

The physical property data listed are considered to be typical properties, not specifications.

NOTICE: No freedom from any patent owned by Seller or others is to be inferred. Because use conditions and applicable laws may differ from one location to another and may change with time, Customer is responsible for determining whether products and the information in this document are appropriate for Customer's use and for ensuring that Customer's workplace and disposal practices are in compliance with applicable laws and other governmental enactments. Seller assumes no obligation or liability for the information in this document. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.